i want to put a momo steering wheel in my 91 nx and i want to know if anyone have done this? is it realy hard to do? thanks for your help

<font face="Verdana, Arial" size="2">Originally posted by madmoney:
i want to put a momo steering wheel in my 91 nx and i want to know if anyone have done this? is it realy hard to do? thanks for your help</font>

This is my choice of wheels (steering that is)
I have it narrowed to these three though:

http://www.grantproducts.com/images/prod/864.jpg

-or-
http://www.grantproducts.com/images/prod/798.jpeg

-or-
http://www.grantproducts.com/images/prod/862.jpg
From what I understand you need to use a B12 (yes B12 87-90) adapter to fit the Airbaged NX2000. It is not hard. All you need is a T50H torx bolt bit. The Antitheft kind with the hole in the middle. After seing all those airbagged cars with nice steering wheels at the convention I realize that i am wasting time. Besides my airbag popped and did nothing for me when I got into an accident so to hell with replacing it.


SR20B12 if you read this ask your father what hub he used on his NX. http://laf.cioe.com/~benbobbo/NonCGI/cool.gif




[This message has been edited by Pretty White (edited 05-27-2001).]

Wouldn't a hub from a classic fit for the NX? Doesn't seem that difficult, I have a couple friends with momo's in their NX. They never mentioned any problems.

<font face="Verdana, Arial" size="2">Originally posted by Son Of Skyline:
Wouldn't a hub from a classic fit for the NX? Doesn't seem that difficult, I have a couple friends with momo's in their NX. They never mentioned any problems. </font>

The hub from a B13 does work. That is what i ordered with my steering wheel so the B12 thing I assume is for MOMO only because MOMO doesn't sell a steering wheel adapter for B13's.

Lets see if I can revive this old thread. I have a Momo Thunder Wheel.

http://www.centellas.org/sam/blog/01-04/thunder.jpg

I want to get it in my 91 NX. I have the itch to work on her and in this cold this is one of the only projects I want to take on since I got no garage. What hub should I get? Where can I get the bit set I will need to work on it and remove the screws?

Bump... Also what about a horn. My wheel has been changed already and it does not work (they put a non-airbag wheel in from a Pulsar I think before I owned it).

What are some horn options. Maybe a push button on the dash with a middle finger icon on it?

I have a nice Tenzo R streeing wheel in my NX2K that works great, it is coupled with a momo streeing wheel hub adapter for the NX. Just go get one from Cardomain, not sure if its listed but give them a call and order one up! I think its like $12 or $20, all I know is momo has an adapter that works fine.

There are directions for making your horn work in the archives. Basically what you do is slice the yellow airbad harness a little and find the horn wire. Put an extension on it and run it to the back of the circuit board on the stalk. Then use a rounded piece of metal like a tack with a ball point pen spring in the hole on the front of the stalk. That will make contact with the ring on the hub and your horn will work fine. If there is a junkyard near you grab the spring and contact part from a non airbag sentra.

What is 12 or 20 bucks? the hub? i have seen MOMO hub kits for like 60 bucks. Whats the difference?

My Mistake about the steering wheel hub, there not $20 bucks. I am pretty sure that I got mine from Cardomain though for around $50, because I still have my receipt. But I just checked today and the price is $63!!! That is ridiculous, the guy discounted it for me for some reason I think....Sorry about the misinform..but the hub works great!

um there is nissport I think has one and its very simple to use also from what I hear.google search them.

http://www.nissport.com/catalog/category.asp?EquipmentType=Quick+Release
just found it and found out it is 195.00$ yeah I know I know

Thats crazy ass expensive, just get the momo one.

The nissport unit is mainly for track use.

I could'nt find a tamper proof torx bit so I used needle nose vise grips, save you a few bucks

Also just take out the airbag bulb or they won't inspect it

I dont think it's necessary to have an airbag before 1995. Most states will pass inspection. I know NY does, but im not sure about others. I'd pull the bulb though, just because i wouldnt want to see that light all the time.

That doesn't work. You have to leave the bulb in and tape over the contact on the board. I tried pulling the bulb and it caused another problem that I can't remember right now.

I'd pull the bulb though, just because i wouldnt want to see that light all the time.

when i put the steering wheel on my celica, i HAD to rip out the connection where the airbag and horn go so i got the air bag light all the time, i just pulled it and that was the end of it..

I could'nt find a tamper proof torx bit so I used needle nose vise grips, save you a few bucks

How hard was it? I don't want to damage anything if I don't have to.