<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
I wanted to know what muffler you guys use and what kind of gains u received from it, and which brand and type do u guys feel is the best for the nx2000. Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud and one that most definlately does not have a ricey sound...if you guys can help, i would appreciate it..thanks.

</font>

Dynomax Ultraflow. I will go outside and take pictures tomorrow. A friend of mine works at a muffler shop so I had him do it for me. It looks like a pre-fab job the way he did it. This guy is in Brooklyn if you want to travel out here.
http://www.angelfire.com/ny/ianjiggyroom/IansNX2000page.html
or look on page 263 of Superstreet

<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
...what muffler you guys use ... Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud ...
</font>

Not NX specific, but: http://laf.cioe.com/~benbobbo/NonCGI/Forum1/HTML/001129.html might help (photos off the link also)
Dan

I wanted to know what muffler you guys use and what kind of gains u received from it, and which brand and type do u guys feel is the best for the nx2000. Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud and one that most definlately does not have a ricey sound...if you guys can help, i would appreciate it..thanks.

------------------
1992 Nissan NX2000
White...fully loaded
Stock (for now)

thanks a lot for the input, that post you did had some really good info, and i think im gonna try and duplicate your setup, because i too want to keep it stock looking and keep my torque and loosen up the high end a bit. thanks again...

------------------
1992 Nissan NX2000
White...fully loaded
Stock (for now)

<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
I wanted to know what muffler you guys use and what kind of gains u received from it, and which brand and type do u guys feel is the best for the nx2000. Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud and one that most definlately does not have a ricey sound...if you guys can help, i would appreciate it..thanks.

</font>

Here are the pics and descriptions of the exhaust on the back of my NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Dynomax1.JPG
http://www.angelfire.com/ny/ianjiggyroom/images/Rear.JPG


This is the Greddy I had on the NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Greddy1.JPG
I left out the fact that the tip was too long and had to be cut as well.

<font face="Verdana, Arial" size="2">Originally posted by Pretty White:
Here are the pics and descriptions of the exhaust on the back of my NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Dynomax1.JPG
http://www.angelfire.com/ny/ianjiggyroom/images/Rear.JPG


This is the Greddy I had on the NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Greddy1.JPG
I left out the fact that the tip was too long and had to be cut as well.

</font>

Helllo, anyone listening out there? Why am I providing this info if no one is paying attention?

Prettywhite your pics arent showing up....

<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
Prettywhite your pics arent showing up....</font>

You have to refresh the page or click the link in the go box once you get the Angelfire logo. I don't know why they don't show up.