Note: I did a search on this forum and did not find info on this issue.

Last night I installed my HS CAI. After starting the vehicle, it would not hold idle. It would "die". Start it back up, reved engine between 2-3k to get warm . After about 5 mins, it would "bog" ,"stutter" and almost die.

Now, I double checked all my vacuum hoses, made sure they connected and not leaking.

I'm missing something here, do I need adjust my idle? Does the ECU need time to compensate for the changes?

Any opinions would be appreaicated.

Try adjust with it screw. I did the same thing, but it started snow ball.
My Throttle was dirty, clean it. Then my AAC valve need to be replace and remap the MAF.

also recheck the vacuum lines and make sure the hose material that connects the sections of the intake are fitted right, if they arent good and tight then itll make the car run crazy