hey guys, i searched but was unable to come up with the part numbers for a T25 turbo-downpipe gasket PN, and the PN for the studs that hold the downpipe to the exhaust outlet. I have almost every single part to do my swap at this point. I believe these are the last few items i will need. TIA ~josh

I believe you can just pick up some studs from a local exhaust shop. I'd bring it in though to make sure you get the right thread and length.

you can get the bolts anywhere. just make sure its grade 8 bolts. as for the gasket, im not completely sure but a 300zx twin turbo gasket might work. but id rather make the gasket myself. just get a piece of aluminum roof flashing. heat it with a propane torch till it gets a little soft. then cut it to size. heating the aluminum will anneal it to make it softer so it can compress around the inperfections of the mating surfaces.

the downpipe to j pipe gasket is off a 240sx or a maxima or something funny like that I think it is a 26291-58e00 or something like that, but between the turbo and the j-pipe it is not the same as the 300 one, you have 5 bolts, the 300 uses 4, I think the pn on that one is 14445-26e00, and is a nissan motorsports part and will probably have to be ordered by your local dealer, or you can order through me @courtesy :)