Questions about Sparco steering wheel [Archive] - SR20 Forum
PDA

: Questions about Sparco steering wheel

nikko
03-15-2003, 05:41 PM
Sparco Suede 383

Do I need to buy a Sparco/MOMO hub adapter?
Anything else I need?

Thanks.
-- Nick
Geo
03-16-2003, 01:33 AM
Not unless you want to actually put it on your car. ;)
nikko
03-16-2003, 01:53 PM
So, steering wheel + hub adapter.
Thanks.
squeezinSE
03-18-2003, 11:23 AM
If you find a hub let us know as I've been searching for this for a long time to no avail. Momo seems to be the only one that makes one but it's been out of production for some time now...of course this depends on what car you have
blairellis
03-18-2003, 12:00 PM
doesnt george make one that disconnects? (www.nissport.com)
Geo
03-18-2003, 10:39 PM
Originally posted by blairellis
doesnt george make one that disconnects? (www.nissport.com)

Yes, but that's a race only item.

I'm 98% sure the MOMO adapter is P/N 3512. As soon as I get my G20 back I'll let you know if I'm wrong. Actually, I'm 99% sure that's the right number.
paNX2K&SE-R
03-18-2003, 10:47 PM
I'm holding the box to my spare MOMO hub right now and the part number is 12120123511. I have the same hub on my NX and it fits perfect. I think it was listed for the B12 when I bought it.
Turbo91SER
03-19-2003, 08:32 AM
Originally posted by squeezinSE
If you find a hub let us know as I've been searching for this for a long time to no avail.

I just got my Sparco Hub adapter last week.

Let me know if you want me to get you one.
squeezinSE
03-19-2003, 10:49 AM
They fit the b14? I do have an airbag so I don't know if this changes things any
Turbo91SER
03-19-2003, 01:14 PM
Oh, I have no idea about the whole airbag thing. I would never remove a factory airbag for any reason.
paNX2K&SE-R
03-19-2003, 01:21 PM
I airbag was blown on my NX after a small "incident" and thats why I got my MOMO :)
Matt
03-19-2003, 02:22 PM
I removed my airbag, it doesn't effect anything except the airbag light comes on. I just disconnected it at the back of my gauge cluster. The only PITA is the cruise control, and horn wiring.
paNX2K&SE-R
03-19-2003, 02:39 PM
I just pulled the horn wire out of the harness and plugged it into the location where a non aitbag car wire would be located and then used a spring and pin in the facotry hole that contacts the ring on the hub. For the cruise I just unwound the spiral cable and mounted the control unit on the dash to retain cruise. I also disabled the airbag light.
Se-R 420
12-29-2005, 10:56 PM
www.tekniqauto.com sells wheel hubs
OnyxEros
12-30-2005, 10:21 AM
Rise from your grave...
Jaketips42
12-30-2005, 06:00 PM
Use a 95+ 240sx hub.
Terms of Use