I was wondering if I should go to nissan and get wires or get them at like napa or whatever?

If you want regular wires you should get some ngk's. Don't bother buying any cheaper ones from places like napa.

buy some magacor 8.5mm wires w/ ngk laser plat. plugs...

you won't regret it !!!!:)

Hey, looky at what the SEARCH feature turned up.
Took all of 30 seconds. I should write this down.

http://www.sr20deforum.com/showthread.php?s=&threadid=12272&highlight=plug+wires

http://www.sr20deforum.com/showthread.php?s=&threadid=12272&highlight=plug+wires

http://www.sr20deforum.com/showthread.php?s=&threadid=35276&highlight=plug+wires

http://www.sr20deforum.com/showthread.php?s=&threadid=38340&highlight=plug+wires

Send me your address and PayPal me 37 cents... I'll write it down and mail it to you. If 100 or more people want it, I'll talk to the Postmaster General and see if he'll cut me a break on postage.

C (:-)

I would buy some NGK wires man, they are pretty nice and seem to work great with the Nissan ignition. The stock wires seem to do a great job to if you want plain black ugly wires.

Brent

i use the ngk wires and are happy with them.....

ngk or oem. nothing else!

NGK. I am not trying to bash OEM, but I see them fail sooner.

Aight thanx guys and I should b able to pick up some ngk wires at like napa, adavance auto, or pep boys right?

Originally posted by NissanPower305
Aight thanx guys and I should b able to pick up some ngk wires at like napa, adavance auto, or pep boys right?

If you can wait for them, get them from
www.courtesyparts.com
( bookmark it now )
about $47 for OEM.
ACCEPT NO OTHER!!!!

Pep Boys, AutoZone, Discount AutoParts are not going to have them.
They'll have flaky Boschs.

Originally posted by SmoothDaddyFig
ACCEPT NO OTHER!!!!

Figgy: why not NGKs?

On a side note I did hear some bad stuff about the NGK plugs breaking upon removal.. :confused:

That's what happened to me a few days ago. I have NGK's and I know they have a good track record, BUT, just the other day I was putting in a new rotor and cap, and was removing the plug wires from the cap for the first time since I put the wires in a few months ago, and rather than have my #2 wire come out of the cap, it decided to come completely loose from the damn terminal. So I had to crimp the terminal back onto the wire. So needless to say, that didn't impress me too much, didn't give me a confident feeling that I'd bought quality wires. It also didn't help that the connection between the terminal and the wire, is accomplished by means of a short piece of wire that is merely pushed into the wire, bent over and makes contact with the terminal when it is crimped on. (I should have taken pictures). I'm not blaming NGK per se, I assume all wires are made this way, and if I could make better ones myself I'd do it. I did, however, find that the OEM wires I had on before had more resistance than the NGK's. But I still have an uneasy feeling about it.