What is for our cars? 40+?

Anything from 0-20's look really cool on any nissan.

mine has a 40 mm offset.

I'm looking to buy wheels obviously and the ones I would like to get are 42mm offset. I read some where that ours was 40mm. Would that make a difference? They are 17" think they would rub?

------------------
96 w/ HS CAI(soon to be installed), timing @ 17, Naxos muffler, Eibach Sportlines, KYB GR2's all around(soon to be replaced w/ Motivational fronts), APC Clear corners, and Focus short throw.

I think my 16x7's are 38mm offset

I have some Enkei RS6 Coming to me and it's 17x7 4/100 Bolt pattern with a 38 offset, Will these fit?

B14 stock wheels are 15x6 w/ a 40mm offset. Anytime you increase the width of the wheel, you "should" go down in offset size so you don't get into rubbing w/ suspension components. Always good to stay within minus 5 mm(35mm) or plus 5 mm from stock(45mm), since 5mm is 3/16 of an inch in measurement.

The higher the offset, the more you are putting the wheel towards the suspension components.

Search guys, i was looking this stuff up last night

anything w/ a 30-40mm offset is usually fine

i have 17's with 42mm offset on a Sentra SE and they fit fine. But i also have the tein's which are a little slimmer than GC's or stock.

Anything from 0-20's look really cool on any nissan.

Yeah, if you like your wheels sticking out or rubbing your fender.