Teal97
02-24-2001, 07:48 AM
does the b14 fsm specify the air gap between the abs pickup sensor and the rear hub reluctor (toothed ring)?
|
Bowlcut 02-24-2001, 02:18 PM Pretty close.... Ben 02-28-2001, 10:10 PM Eric? Anyone else with B14 FSM? I ain't got one. http://laf.cioe.com/~benbobbo/NonCGI/smile.gif ------------------ Ben98SentraSE 98 Sentra SE TURBO http://laf.cioe.com/~benbobbo/sig2.jpg brian 02-28-2001, 10:41 PM did you get the right one? you know what I mean.... ------------------ 98 se-r w/ p/r cai,jwt s3 cams, stillen header, courtesy exhaust, ur pullies, JUN flywheel, ACT clutch, NOS nitrous kit, eibach springs, kyb struts, st sways, cusco camber plates, f/r strut braces,stillen lower control arm brace, lotsa bushings, and a bunch of other crap NoVTECSER 02-28-2001, 10:58 PM Front 0.1-1.1 mm (0.004-0.043in) Rear 0.1-1.1mm (0.004-0.043in) Teal97 03-01-2001, 07:21 AM brian; i haven't had a chance to put them on yet (we had a little quake here yesterday) but i inspected/measured them and they do seem correct. i'll install them this pm. thanx for all the research you put into it. novtecser; thanx for your response also. this confirms my earlier suspicions. ric/getting the se-r ready for lapping days at pir:-) brian 03-01-2001, 08:47 PM ya, I responded before I saw the news. you ok? car ok?? ------------------ 98 se-r w/ p/r cai,jwt s3 cams, stillen header, courtesy exhaust, ur pullies, JUN flywheel, ACT clutch, NOS nitrous kit, eibach springs, kyb struts, st sways, cusco camber plates, f/r strut braces,stillen lower control arm brace, lotsa bushings, and a bunch of other crap Teal97 03-02-2001, 05:42 PM [QUOTE]Originally posted by brian: [B]ya, I responded before I saw the news. you ok? car ok?? i installed the hubs today. these ARE the correct ones. the bearings in the oe rr hub were toast. thanx ric 97 se-r w/quiet rear end brian 03-03-2001, 05:47 PM cool. three times is a charm http://laf.cioe.com/~benbobbo/NonCGI/biggrin.gif | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.