Please let me know if the side feed 370's fit in a 2000 sentra se! Thanks

91-99 SR20DE injs do not fit in 2000-01 motor.

Andreas Miko

Originally posted by Nismo91ser
Please let me know if the side feed 370's fit in a 2000 sentra se! Thanks

Get some 38lb MSD top feeds... or you can get the 34lb's, but you will have to run the ballast resistors. The 38's will flow closer to what the 370's actually flow (which has been logged at around 390cc or so). The 38lb MSD's flow 399cc at 3 bar pressure. That should be perfect for any ECU setup to run the 370's. Or, you can send your ECU and an injector to JWT and have them make a program for that particular injector. Either route you take, the MSD's are a direct bolt in on the 2000+ SR20DE. You have to use about 4-5 flat washers under the two bolts that hold the rail down to the manifold. This is done to shim the rail up about a 1/4 of an inch for the slightly taller MSD injectors. If you need any help, PM me..
Travis

i think these were the ones enemigo was asking about..

Trav and others,
what about MSD 50lb injectors? what's the mod to make those fit? or is it the same as for the 38lb?
JCC

yeah.. same physical size..