I have several motors/parts in the garage...

1st is from a 99 G20, has a spun bearning but its just barley making any sound, could just need bearings replaced (oil filter came off on this motor, car was stopped and refilled ASAP). Head is spotless, cams and everything look great. Will come with intake/head/bottom end, unless you ask and I didn't list it its not included.

2nd is a bottom end from a '92 NX, not sure what was wrong, head is off and not included, deposits on the cylinder head, couldn't get car to start, was a problem with valves and injectors were leaking, I'm assuming bottom end is *probably* ok - not sure, front main seal is leaking.

3rd is a head from a different 92nx - sludged big time, needs to be cleaned/reconditioned before use. Does not include cams

4th is a head from a 95+ 200SX, its in perfect shape, was removed to swap a high port on for the application I need it for, looks very very good. valves installed, no cams.

Next: 91-93 1.6L motor + auto tranny, traded for an alternator, was thinking of using it in a go-kart project (hehehehe) don't have time for that or the space to store it, I was told it was running just fine before being removed for a DET swap, complete minus one injector (has alternator, ps pump, ac compressor etc).


Finally, misc bolts/brackets, low port intake manifolds etc, if you need it, I prolley got it. Make offers on anything - PLEASE email me so my PM box doesn't fill and make sure to specify what your interested in... My garage is overfilling.... thanks.
Chris

chrisstorer@insightbb.com

email sent

Originally posted by MauiBlueGride
4th is a head from a 95+ 200SX, its in perfect shape, was removed to swap a high port on for the application I need it for, looks very very good. valves installed, no cams.
chrisstorer@insightbb.com

I'm getting my 95 running this weekend for sure and I'm not sure if I messed up the head at all. Its possible I need another. I'll let you know late this weekend.

BUMPITY BUMP BUMP BUMP

im very interested in your second item up for sale. The 92 NX bottom end. How much, how many miles, what kind of shape, its 2.0L right? let me know.

That bottom end has 140k, condition wise, cylinders have a lot of deposits on them, and there is oil all over the bottom (front main leaking).

Not asking much. If I ever get time may pull the pans to see if there is a good crank hiding under there :-)

Chris

Let me know how much....
Im looking to buy something in the next couple of weeks, to get my se-r running again. It would need to be shipped to Kansas City, Missouri, if i was to purchase it.

Do you have anything I need for my project? I'm looking for,

Passenger Side Engine Mount.
Alternater Bracket.
Vehicle Speed Sensor.
Half Shafts.
AC compressor.
Flywheel bolts.
Starter bolts.
Distributor bolts.

Maybe I can use some of the parts/bolts from GA16, but always nice to have some extra. Please let me know if you have anything available. :)

Thanks

Would you sell intake manifold off of 99 G20.
I need an extra to have extrude honed & powered coated.

I will let you have mine after I swap out units, if you need.

$35 + shipping and its yours, don't need your old one.

Chris

Chris, I need a intake manifold for the bb(with egr crap), as well as 2 o2 sensors, if you have any laying around. let me know, we can work on a deal.

Brian

How much for the 99 head and the 95 head?, each please. my zip code is 32607,
thanks,
JCC