I just finished the physical part of a BBdet swap, and was unable to locate a spot for what i believe is the EGR temp sensor. I did not swap the EGR stuff onto the det but I *** I still need to get this sensor threaded into the motor to avoid a MIL light. Where does this go?? I found a threaded location similar to that of my lowprt motor, but the sensor is too big and does not thread in. I am stumped, and this might be part of the reaason why I cant get the car started. ~josh

If you are using a JWT ECU, don't worry about that sensor. It won't keep your car from starting either. All it will do it throw a CES light. I'm using a '94 ECU in my '91, and I have a light from it.

ok thanx a lot!! I am using a JWT ecu so its good to know Ill be all set. ~josh