I found these. I'm not telling where though http://laf.cioe.com/~benbobbo/NonCGI/smile.gif

http://www.moneyzipper.com/kindiglo/images/ikac_indiglo_9598_nissan_200sx_ser_white.jpg

http://www.moneyzipper.com/kindiglo/images/ikac_indiglo_9598_nissan_200sx_ser_blue.jpg

http://www.moneyzipper.com/kindiglo/images/ikac_indiglo_9598_nissan_200sx_ser_green.jpg

[This message has been edited by WhiteSER (edited 06-05-2001).]

i've seen em around, for almost $95 last time i noticed, no worries, i bought my white ones for $150 * overnite delivery *



------------------
Kenneth

1996 RED 200sx SE-R w/dynomax Superturbo Exhaust

COUGH COUGH EBAY COUGH COUGH....Oh come on ebay where did you find those ebay indiglos?
I would really ebay like to know!

[This message has been edited by Toddles82 (edited 06-05-2001).]

LMAO... Yeah, they are EBAY. How did you guess? I too once bought those white gauges. Then I tried to install them and the monkey I am ruined all of my gauges. These are overlays so it'll be a lil safer. Don't outbid me!!! please... hahaha

Yeah I've been looking at those for a while now. I'm just kinda leary as to how nice they'll actually look in the car. Oh and don't worry I won't outbid you. Till the last 30 seconds anyhow.

ITS ABOUT TIME THESE CAME OUT!!!! Now lets see how much longer we have to wait for tail lights for the 200's. I will be ordering my set tomorrow guys...

------------------
Peter M.
AIM=NyceP26
97 200SX SER....now with HS Gen 4 Headers

Where else have you seen these Matt4Nissan?

Where can I order them from?

------------------
'95 200sx Se-R Stillen Exhaust, Weapon R adapter intake, 17" Chrome w/ Nitto NT 555

You can bid on this one. http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=592096337&r=0&t=0

I bid $200!
j/k http://laf.cioe.com/~benbobbo/NonCGI/biggrin.gif

Hey I just got those indiglo gauges last week. They are awesome. If anybody wants to know more info about them just ask.

Also instead of bidding on eBay I just e-mailed the seller (KIndiglo@aol.com) and he only charged me $85 including shipping. So thats another way to get em. http://laf.cioe.com/~benbobbo/NonCGI/smile.gif

mike, I think I outbid you by $75 http://laf.cioe.com/~benbobbo/NonCGI/biggrin.gif when I first saw that I almost peed my pants. you fort worth boys crack me up.

Well I'm new here and have no clue how to post pictures so I will e-mail them to u Nyce so u can post em or whatever.

Installation was kinda a pain. The speedo and tach gauges don't exactly slide just over the existing needles like the gas and oil temp gauges do. I had to pull out the tach needle in order to get that gauge on. (to get the tach needle out pull as f*ckin hard as u can and it will eventually come out) And now for the speedo gauge. I read on a few sites that said it is easily broken so i didn't even try to remove it. what i did was try and stretch out the hole in the gauge as much as possible and then basically pushed it on as hard as i could w/o trying to break the needle. I found it was quite strong when i figured out i had left the screws in the stock speedo gauge so i pull off the indiglo gauge and do it all over. http://laf.cioe.com/~benbobbo/NonCGI/frown.gif

I hope this helps a little.

Heres a sites that helped a little:
http://www.sentra.net/solm/april01/indiglo.shtml
(especially for finding a power source for the gauges)

You had to remove the damn needles!?!?!?! Thank god someone outbid me! I will never remove my needles again, it costed me big bucks last time I did that.

Will you post some pics on how they look in your car. I will be getting mine in about a couple days so I want to know. How was the install? Was it difficult at all?

------------------
Peter M.
AIM=NyceP26
97 200SX SER....now with HS Gen 4 Headers

<font face="Verdana, Arial" size="2">Originally posted by NyceP26:
Will you post some pics on how they look in your car. I will be getting mine in about a couple days so I want to know. How was the install? Was it difficult at all?

</font>

Did you get yours yet?

<font face="Verdana, Arial" size="2">Originally posted by WhiteSER:
You had to remove the damn needles!?!?!?! Thank god someone outbid me! I will never remove my needles again, it costed me big bucks last time I did that.</font>

It's not that tough to remove the needles. All you do is take off the needle rest, take note of where the needle stops when you push it counterclockwise, then turn the needle counterclockwise 3times. Then you keep turning while gently pulling up and it comes off real easy.

At least that's how it is on my 97. I've had the needles on and off like 3 times now. If only i had some batteries w/ for my digicam... then you could see what my guages look like. Carbon fiber-look faces and laser red needles w/ a little red glow goin around the circumfrence of the guage faces. Courtesy of Importintelligence.com



------------------

Hey Nollan,

That tip semi worked for me. But bad news is I will be replacing my gauge cluster cause I messed it up. Hopefully the next one I try will be easier. Those damn needles sure are tough, i'll tell you that much.

------------------
Peter M.
AIM=NyceP26
97 200SX SER....now with HS Gen 4 Headers

Guys, this wont fit a 99 Sentra SE will it, i just noticed that the fuel gauage is on the wrong side for my car. Lol they switched up the temp and fuel gaugaes for the SE's http://laf.cioe.com/~benbobbo/NonCGI/frown.gif

Okay im a dork. With a closer look at the picture they are reversed in the photo but still oriented correctly for the cluster. Forgive my dumbness.
------------------
99 Sentra SE Limited Deep Crystal Blue w/Full Sport Package
Open Air Box, Clear Corners
5.6in TFT Display show MP3 track information and TV/Nintendo 64. Full P166 Mounted in Trunk

[This message has been edited by Synx (edited 07-03-2001).]

wow, i really like those gauges, Seattle SE-R. those are better than the NR....or they look to be..

------------------
Is that a honda? What is that silver thing?