|
Johnny wangwang 04-22-2003, 01:42 AM OK the other day when I went to use my turn signals I noticed that they didnt work. They worked fine the day before but now they dont come on. I checked all the fuses that are on the drivers side interior and they are strait. Neither the emergency light switch or the "turn signal arm" make them come on any more. What could it be?? UNDRCOVR 04-22-2003, 01:44 AM Check the flasher. Sounds like its broken, or definately not connected. Prolly a burt out flasher....Josh Johnny wangwang 04-22-2003, 01:58 AM How do you check the flasher? Johnny wangwang 04-22-2003, 01:55 PM where is it located? akapaul 04-22-2003, 02:09 PM Same thing happened to me. Your bulb(s) could be out. Try replacing them. Johnny wangwang 04-22-2003, 02:18 PM When your bulbs went out and you hit the turn signal arm thing did you still hear it click on and off? Cause when I go to hit a turn signal I dont hear any clicking at all. akapaul 04-22-2003, 02:23 PM Originally posted by Johnny wangwang When your bulbs went out and you hit the turn signal arm thing did you still hear it click on and off? Cause when I go to hit a turn signal I dont hear any clicking at all. no.. i heard one first click and that's it Johnny wangwang 04-23-2003, 01:07 AM OK im going to check my bulbs but if thats not it Im going to need to know where the flasher is located. Does anyone know? UNDRCOVR 04-23-2003, 01:53 AM I dont remember exactly. Its wherever the click is coming from. Either under the dash on drivers side, or it seems like I have seen them behind glove box, but Its been about 8 years since Ive done it...Josh NX EXA 04-23-2003, 10:18 AM I don't know if it is the same as the Pulsar or not but the flasher location for the Pulsar is in the same area as the fuse panel. It's a silver cylindar shaped piece. NX EXA 04-23-2003, 11:14 AM I took a look in my repair manual. Here is a pic of the flasher unit location. Flasher unit (http://www.geocities.com/pulsar_exa_89/flasherunit) | ||