Okay, you know on the A/C controls theres 3 knobs right? Well the one on the right that controls the Vents (floor, vents, or windshield defog modes) doesnt really work anymore.
The A/C vents get stuck on either floor or windshield mode, and if I turn the knob it has no affect. Well I can turn the knob and sort of switch between windshield only or Winshield+feet or something like that, but I cant get it to blow out the normal vents(face) Also, the knob doesnt have the same "feel" when u turn it anymore.. it feels sorta loose turning one way, and really hard to turn in the opposite way.

Anyways, I had to reach up behind the A/C vents and flip the control arm/ lever in order to flip it to normal vent(face) mode.

Anyone had this problem before? Or any ideas on how to fix the knob control.

Thx

------------------
'95 200SX SE-R - Jim Wolf Clutch, K&N, CN Catback Exhaust, CN strut bars, KYB AGX, Eibach ProKit, N2K brakes, 91 intake cam, SMC Short Shifter, audio
'99 Prelude base - CAI, Greddy SP
'02 TL Type S - Stock

[This message has been edited by PlanoSER (edited 10-16-2001).]

Hey Matt,
Just take off the face and pull out your knobs to make sure the knob is still attached to the wire thing that flips the vent. when i put in my glow gauges the knobs were attatched to wire/stick like things. if they are not in there right they will do this kind of stuff.

i would say its the little guide mechanism in the back of the gages.. when i put in my glow gages i noticed how that knob works.. u should take out ur face and see if its broke or maybe there are some wires that got lodged in the little sliding thing...hope i helped

------------------
fu@k vtec