hey guys,

just curious if its possible to convert a zex dry kit to wet single fogger? i found a decent deal on a dry kit, but i dont think dry kits are safe. also im only tryin to run a 55-65 shot. lemme know

thanx,
Jim

I have a Zex Dry kit and to switch to Zex Wet you have to replace everything but the bottle and main line. The bottles are over $200 so I would guess that it would cost $250-$300 to convert.
Zex dry kits are safe at 55 shot. If you want 65-75 shot you need bigger injs. and a better fuel pump wouldn't hurt. You can shot 75 with WET kit and no need to upgrade injs. Just don't forget to retard timing 2 deg for 65 & 4 deg for 75 shot.

thanx for the reply. i figured it wouldnt be cheap, oh well. i just happen to find a kit for 265 shipped used and considered it. thanx again.

There is a Zex wet for sell in the classifed section. Alot of people around here bash Zex but it is and really good beginners kit.

I've seen a lot of engines blown from zex kits.

Yea I have seen alot of dumb asses running a 75 or 100 shot with stock injectors and fuel pump. I have installed alot of ZEX dry kits and not one came back with a tosted motor. Time it right, use the right plugs, make sure you are running at least 92 octane, and keep an eye on the condition of your plugs, and you will be fine. I do agree though, that wet is good, but i run dry on all my cars, but that is just me. try the dry at a 55 shot and see if that will do it for ya, if not you can always sell it. Then give me an email and I can set you up with a wet kit. The kit you will need is the 82021.
Good Luck