I was out at the Nissan parts yard (KC Nissan) looking for a radiator and thought I would ask if they had any NX calipers but unformatted they didn't, but the guy said that I could swap out my calipers with 240sx calipers. Is there any difference? Has anyone done this or is it just a waste?

Thanks Mucho in advance!
:D

I believe that the 240 uses a diffrent lug pattern.

240's come with the 4 lug pattern. I would'nt know about the specs on the calipers though. Why not call a dealership and get some info out of them? I'm sure they will give you the answer you will need if you go to the right person.

S13's came with 4 lug, but they are 4x114.3 or somethin, definitely not the same as our 4x100. So, the disc wouldn't fit unless you had it custom drilled.

Question is, would the torque member for the caliper bolt up to the B13 hubs?

240's have a 4x114 bolt pattern as opposed to the sentra/200sx's 4x100.

I doubt they will fit as it's been +10yrs since the car's been out...the guru's would've figured that one out a long time ago when it was discovered the *** made NX2K brakes would fit.

FYI, if the 240 brakes would fit, the 300ztt brakes would also fit. I believe there is different spacing on the torque member.

Jody

he never did mention anything about fitting the brake rotors onto the se-r, just the calipers.

...might need some rotors...redrilling is always an option.

I still believe the torque members bolt spacing is different.

I'd love to be proven wrong here, as the 300ztt brakes on my 240 ROCK!

laterz...Jody