|
: Belt # u12bnextsentra 05-05-2003, 12:37 AM Guys, I have alot customers coming to me that want a belt for the "A/C delete" to be run wtih the UR CRANK and WP. Has anyone found out the proper belt # for this application. Thanks in advance Jamie civicdragon 05-05-2003, 12:57 AM isnt it on the UR website? u12bnextsentra 05-05-2003, 12:58 AM Gives you the pulley #'s for the use of A/C, but not with out civicdragon 05-05-2003, 01:00 AM I think you use the one that says just alternator, since the a/c and alt are run off the same belt... 1991-94 Gates K040305 u12bnextsentra 05-05-2003, 01:16 AM Can't use it as The A/C will not be in the cars so this belt will be way too long. You have to get the belt that alot shorter. AztekSE-R 05-05-2003, 01:23 AM on the Nissan belts its just a tiny bit shorter so look for one thats a tiny bit shorter than the one you got :D haha ok im dumb civicdragon 05-05-2003, 01:28 AM Originally posted by u12bnextsentra Can't use it as The A/C will not be in the cars so this belt will be way too long. You have to get the belt that alot shorter. Whoops i was looking at the 1.6 belts... hmm they only show the two pulley sets for the 2.0 well all i know is that its shorter than 39 inches TRUSE-R 05-05-2003, 05:37 AM The belt # for the belt for SE-Rs without A/C is on the instructions that come with the UR pulleys It is: Gates K040310 (31 5/8 or 805MM). I just got my 2 pulley set from Jaime (great guy) and they look awesome. It states to give 5-7 days for your computer to recal itself. After that time you will be able to experience the full HP gains from them. I hope this helps... sprayinser 05-09-2003, 03:52 PM ok maybe im just dumb but i couldnt find it for the 4 pullies set myprojectB13 05-09-2003, 05:25 PM The Nissan part # is 11920-77A00TM. This belt is for running just the alternator, no AC, it is 1 rib skinner than the stock belt. Jonathon u12bnextsentra 05-09-2003, 05:33 PM got it, I actually had the damn thing in stock. The stock is a 6 rib and the one you run without A/C is a 4 rib kesi24 05-09-2003, 05:40 PM Originally posted by myprojectB13 The Nissan part # is 11920-77A00TM. This belt is for running just the alternator, no AC, it is 1 rib skinner than the stock belt. Jonathon I have a 4 pully set will tis work on it..dont want the ac compressor on my car anymore sprayinser 05-09-2003, 06:47 PM Originally posted by kesi24 I have a 4 pully set will tis work on it..dont want the ac compressor on my car anymore thats what i was tryin to ask too u12bnextsentra 05-09-2003, 10:03 PM Gates K040310 will work with the 4pc kit also....only 1/8" difference Rockwood 05-10-2003, 06:57 PM oh, and to put it on (trust me, it will be near impossible) put it all the way on the alt pulley. then, put it on the crank pulley as much as possible. then you just turn the crank, and it will slip right on. you will not be able to make it work with just your hands, shit. :D NX1600lasgen 05-11-2003, 11:02 PM yah, the 4 rib 310 belt is what i used from gates.....works perfectly to bypass the a/c compressor. kesi24 05-12-2003, 09:12 AM Ok last Question who sells gats belts locally?pepboys,Auto zone or Strusts aknapp 05-12-2003, 10:50 AM ^^^ Pepboys: Yes Auto Zone: Yes Strusts: ??? (never heard of them) | ||