|
: anyone running 4 bar ecu w/t28 and 370's? bickricksr20 05-13-2003, 05:50 PM anyone running 4 bar ecu w/t28 and 370's? I was wondering if there were any *** advantages to this setup. From what I have searched and found the answer is no but I would like to hear from some one that actually runs this setup or some one that knows about it better than me. I am planning On running it. And i had someone tell me its not possible yet JWT tells me its a good setup??? thanks Richard Casillas skyliner 05-13-2003, 06:22 PM Ask Greg Perry (SerpriseinWV) he can tell you all about it. Basicaly if you plan on not going bigger then the T-28 , it's the perfect setup. chriscar 05-13-2003, 06:57 PM It's definitely possible, JWT does it all the time. You need the 4bar, 370cc program, a bored maf, and an adjustable fuel pressure regulator. That combo will support 280whp, maybe a bit more. I'm not talking from experience, but I've read this plenty of times on the forum. Chris SE-R_Dan 05-13-2003, 07:57 PM I've been running it at stock boost for about 2 weeks (T28/370cc@4-bar/bored MAF on a BlueBird motor). This Friday I hope to install a manual boost controller. Eventually I'll shoot for about 280whp. DannySE99 05-14-2003, 08:35 PM I have that set-up but with a t3/t04E turbo. Best I've made so far was 287whp and 248lbs of torque. Serban 05-14-2003, 09:54 PM I've got a t25 with t28 internals with this setup, and I like it alot. I got 215hp out of the car at just 6psi with the top mount IC. freak4 05-15-2003, 12:08 AM I will be soon...mwa..ha...haha :). The only thing i thought was that with the extra fuel pressure it'll stress your fuel lines a bit more and they have more of a chance to fail. Peace -STEVE_0 | ||