|
trophy 05-18-2003, 01:13 PM Ok, now lets say i have a BB DET, would a new t28 be a direct bolt on? Heres why i ask.. I have enough money to buy a BB DET, so i am thinking i could buy one, then sell my DE motor, and buy a T28, and put it on, but it needs to work with the stock BB ecu and everything else. So that would be a DET with a brand new T28. Would this work well? BoostKreapCT 05-18-2003, 01:16 PM No. The BB Manifold will cause the T28 to hit the block (clearance issues) You'd need a GTI-R Manifold, IC, IC Piping, and a new downpipe..that is...if your running the T25 TMIC Setup. UNDRCOVR 05-19-2003, 02:06 AM and a new downpipe From what I have been told, you can cut the pipe at the top flange, rotate it a bit, and weld it right back on for perfect fit... AyrtonSennaD 05-19-2003, 08:52 AM If you wanna run with more boost you will also need injector (440cc stock inj of the GTI-R), fuel pump and 300 ZX maf but am not sure. You will need to reprogram your ecu for your new inj to. BoostKreapCT 05-19-2003, 09:20 AM Originally posted by UNDRCOVR From what I have been told, you can cut the pipe at the top flange, rotate it a bit, and weld it right back on for perfect fit... That is true, you can... Totally forgot about that ;) david 05-19-2003, 12:37 PM Or use the t25 elbow on the t28 turbo. | ||