Hello everyone-
I was wondering if there is anyone out there with the Cobra MAF on a
94 Sentra SE-R who could give me a diagram or let me know which wires I
need to splice into to get it working. If you have the answers please let me
know.

Richie

i have the directions . u have to use the ford wire kit f43z-14a411-a to replace the nissan wire loom connector. then from the ford maf u connect pin A which is power to power from ur old maf which is the orange/blue strip wire. pins b and c from the ford maf are both ground and they get connected to the white wire from the nissan maf. and then pin c which is signal 0-5v gets connected to the orange wire from the nissan maf . this is how it is done for a 91 se-r your model might be different but i dought it .