Hey guys,

I'm finally done installing all the parts neccessary to be turbocharged again. I am running a JWT ecu, t-28, and 370cc injectors.

I tried to start the engine last night and it runs, but then dies if I let off the gas.

The ECU is showing the trouble code 1,2 (mass airflow sensor/circuit). I am using the stock MAF with extended wires to reach over to the fender.


Does anyone have any suggestions on what could be going wrong?

Thanks in advance.

Charles
The nismoproject

Well, since you mentioned you lengthened the wires to the MAF, you might wanna check it out to see if you do a better job at it.