|
: Cams and cam gears with turbo Justin R 07-24-2001, 03:05 PM I am going to install a turbo kit on my 91 Classic with JWT S3 cams. Someone I talked to who has an SE-R with a turbo and the same cams recomended that I install cam gears. Should I use the cam gears or not? And if so, what should the cam gears be set to? Thanks. Justin IMOA 07-24-2001, 06:01 PM Unless you need to I wouldn't bother with the cam gears. If you are desperate there are quite a few options, HKS, JUN, APEXi, TODA, Tomei, Dragon, MMR etc all make them for the SR, cost is around the 15000 yen mark each. brian 07-24-2001, 11:05 PM over here you can get the jwt or stillen easier, and you use it to retard the exhaust timing to give a little better overlap?? PDX S2000 07-25-2001, 01:17 AM So has anyone done the cam gears? I've been running the S3's for a while now, never had any problems.. but I'd love to get feedback from anyone who's played with them on any benefits. ------------------ Brian AIM: pdxs2000 91 se-r 12.31 @ 117.8mph 00 s2000 14.1 @ 98.6 mph SeattleSE R 07-25-2001, 02:14 AM <font face="Verdana, Arial" size="2">Originally posted by PDX S2000: So has anyone done the cam gears? I've been running the S3's for a while now, never had any problems.. but I'd love to get feedback from anyone who's played with them on any benefits. </font> Didn't Lewis Shadoff w/ the auto 97 SE-R w/ Hotshot Turbo kit have s3's too? I'm pretty sure i read that he installed cam gears and did some adjustments. check his website or the archives... | ||