|
NX-t 07-18-2001, 11:49 PM I'm doing an install, I have already pulled out my sr20de engine and was getting ready to put in my sr20det engine and the harnesses are not the same , wich do I use? and I can not find the wires that plug into the tranny are there any? is there any advice you guys can give?? the sr20det came out of a pulsar gtir. any other info you need just ask. thanks guys. ------------------ Jason RacerX 07-19-2001, 02:03 AM I think there are only 2 or 3 plugs going to the tranny ------------------ 93 NX2K some stuff and a DET "project street mod?" 1988 BMW M3 w/ a few toys NX-t 07-19-2001, 08:24 AM ya there are only two that plug in it but I can't find them and I can't find the plug that connects two the o2 sensor. Mike 07-19-2001, 04:56 PM Use your stock USDM harness. You will have a few unused plugs(EGR crap) but thats no big deal. NX-t 07-19-2001, 08:46 PM Okay So I use the harness off my car not the one off of the engine. SeattleSE R 07-20-2001, 11:10 PM Yes. jbanach77 07-25-2001, 07:46 PM yeah use the harness off the u.s. sr20de for the det. you might have to use the distrubutor form the de also. you will have extra plugs for where the egr and for grounds. there is another extra plug but i can't remember at the moment. i hope you already know that all the bolts for the tranny do not line up, but that is ok. if you have a gti-r you will have to drill out the holes for the bolts that go into the flywheel to the crank. but it is like a .001 of a inch, very easy to do. will take at the most of 5 minutes. while the motor is out i would recommend doing a motor mount upgrade. that way you get mre power to the wheels and kinda preventative maintenance at the same time. if you need any more tips just e mail me dude jimmycrackcorn77@hotmail.com jimmy 1996 200sx gti-r motor http://www.eiptuning.com/projects/200sxser1stpage.html | ||