New lining inside [Archive] - SR20 Forum

: New lining inside


NXFuer
03-21-2004, 01:06 PM
Sooo after taking out the many lbs of sound deadening and firewall stuffs, I coated the chassis with spray truck bed lining.
http://216.67.228.232/~jared/pic%20117.jpg
there was all that was taken out.
http://216.67.228.232/~jared/pic%20113.jpg
http://216.67.228.232/~jared/pic%20114.jpg
http://216.67.228.232/~jared/pic%20115.jpg
http://216.67.228.232/~jared/pic%20116.jpg
Fun Stuffs :D

Josht34237
03-21-2004, 03:07 PM
how much does all that weight ?

R0b_
03-22-2004, 01:13 AM
about 55lbs :-)

Bjorn
03-22-2004, 01:29 PM
nice job - I was thinking about that too, but a little apprehensive - how tough was it to spray, just like paint or tougher? how much did you put on (thickness, weight)?

NXFuer
03-22-2004, 02:01 PM
nice job - I was thinking about that too, but a little apprehensive - how tough was it to spray, just like paint or tougher? how much did you put on (thickness, weight)?

It took more cans than I thought. If you are going to do it, buy like 5 cans. It's kinda harder to spray than paint because towards the end of the can, it just starts coming out like water, so it doesn't give a nice spray and it gets everywhere when you shake it. It's not very thick though, just enough to cover up the paint. Let the car set for a full day though, because it tends to chip easy if you don't. Also, if you don't like the smell, be sure to buy 5 air fresheners too. :D

NissanTuner
03-22-2004, 03:31 PM
nx fuer, where you in the calabrias italian restuarant parking lot a month or 2 ago? i was outside with a few of my coworkers pointing out that someone else in the state does indeed own an nx2000. it looked just like yours.

Josht34237
03-22-2004, 04:17 PM
how much work is it to get the sound deadening out?

NXFuer
03-22-2004, 04:28 PM
nx fuer, where you in the calabrias italian restuarant parking lot a month or 2 ago? i was outside with a few of my coworkers pointing out that someone else in the state does indeed own an nx2000. it looked just like yours.

I dont know, probly, i haven't seen any that look like mine around here. and....
To get the sound dead out, use dry ice. Check my other posts for a video of doing it. It's can be a biotch though in the corners.

SentraDragon
03-22-2004, 07:34 PM
I got mine out with a hammer and chisel, wher edid you get the liner spray? Is it really heavy or is it light like paint?

NXFuer
03-22-2004, 10:59 PM
I got mine out with a hammer and chisel, wher edid you get the liner spray? Is it really heavy or is it light like paint?

I got it from a paint shop that sells car paint. It not light, but not heavy either. It sprays on light but after it hardens, it feels like the bottom of your shoe.

Josht34237
03-23-2004, 03:42 PM
I've seen that spray liner at wal-mart