|
PDR_sentra 03-24-2004, 08:27 PM ok i was drilling a hole over the radiator and i hit the wires that are over it. i taped the wires up. fixed some fuses that blew in the engine compartment and it still wouldn't start so then i replaced the relays in the car, it still wouldn't start. please help me what should i do!!!! it has to be something with the ingntion. thanks Gibnutz_101 03-24-2004, 09:17 PM I think airbag wires run through there also PDR_sentra 03-24-2004, 09:21 PM i dont have airbags byronchrisp05 03-25-2004, 12:18 AM Get a wiring diagram, and find out what exactly that wire does, and check to see if you damaged any other wires. nismo91 03-25-2004, 12:27 AM If you can please take a picture of the wires you damage and post it. If anything you might have to cut the damage part and splice an inch or so of wire for replacement. Please make sure that you sodder the splice area and then tape it. Also verify the wire that you damage through FSM to have some knowledge of what you have damage for future referrence (just in case you have car trouble). ok i was drilling a hole over the radiator and i hit the wires that are over it. i taped the wires up. fixed some fuses that blew in the engine compartment and it still wouldn't start so then i replaced the relays in the car, it still wouldn't start. please help me what should i do!!!! it has to be something with the ingntion. thanks Peter 03-25-2004, 10:58 AM If you can please take a picture of the wires you damage and post it. If anything you might have to cut the damage part and splice an inch or so of wire for replacement. Please make sure that you sodder the splice area and then tape it. Also verify the wire that you damage through FSM to have some knowledge of what you have damage for future referrence (just in case you have car trouble). If you need that part of the harness I have it intact from my parts car strip-a-thon. Peter PDR_sentra 03-25-2004, 09:46 PM i fixed it thanks just a bad wire thanks | ||