|
: where can i find Side Moldings? SiCrew 08-23-2004, 09:40 PM i had another thread but it got moved to WANTED section where it got very little response. i need this: http://www.sicrew.com/shek/moldings2.jpg somebody tell me where i can get them besides Junk Yards i had the car for just a few months, so hard to find parts! -shek JKho 08-24-2004, 03:57 PM I have the ones in the front including the turn signal if you are interested. PM me and we can talk. Cheers, Jason tierdrop 08-24-2004, 04:58 PM And i just threw mine away I would have givin them to you if id known someone wanted them nx2thousand 08-24-2004, 06:09 PM how do you remove those moldings to say repair a rust spot without breaking them off? Are there bolts or screws holding them on? tierdrop 08-24-2004, 09:04 PM mine were glued on there. SiCrew 08-24-2004, 09:38 PM ahh i just really need need hte ones on the doors and rest of side thanx for the front, but i really dont think i need them w/o the sides its all moldings, or no moldings =) SOMEBODY MUST HAVE EM SOMEWHERE! -shek insane imports 08-25-2004, 01:38 AM I replaced the 1 on the driver side door on my car. I ordered it from nissan and it came pre painted it was like $60-80.00. Mine were held on with 3m tape and the new 1 came with 3m tape already on it. Later,Jon SiCrew 08-25-2004, 10:22 AM looks like i'll be shaving my moldings ! lol all good, more work, but cleaner outcome... if ANYONE has em, please let me know asap otherwise ::puts on evil mad scientist face:: otherwise......i'll be operating on the nx..once again. -shek tierdrop 08-25-2004, 04:57 PM looks like i'll be shaving my moldings ! lol all good, more work, but cleaner outcome... if ANYONE has em, please let me know asap otherwise ::puts on evil mad scientist face:: otherwise......i'll be operating on the nx..once again. -shek I started shaving the lines in the hood and looked back and thoung that it will look better without the side moldings. So i decided to shave em SiCrew 08-25-2004, 05:10 PM what did u use to shave them? fiberglass bondo sheet metal info would be great! -shek evilsr20degg 08-25-2004, 08:35 PM i have them cause im in the middle of shaving mine. joeangel 08-26-2004, 03:08 PM Most dealerships will have them in various colors. tierdrop 08-27-2004, 07:34 PM what did u use to shave them? fiberglass bondo sheet metal info would be great! -shek I use bondo. Just becaues ive never welded ** and only did fiberglass once and f*ck everything up had to redo it again. SiCrew 08-28-2004, 12:56 PM the metal (doors) are going to flex alot r u afraid the bondo will crack? -shek tierdrop 08-28-2004, 05:35 PM Im trying the bondo first. Since that its what I know how to do. Hopefully it will work. The hole car is a trial and error. SIKDRIFTER240sx 08-28-2004, 11:15 PM as long as you dont get to thick with the bondo it wont be a problem SiCrew 08-29-2004, 12:26 PM ahh ok...but the indentation is pretty freakin thick (and tall) this is gonna be a mission. -shek tierdrop 08-29-2004, 03:17 PM ahh ok...but the indentation is pretty freakin thick (and tall) this is gonna be a mission. -shek yeah thats what ive been screamin at | ||