how much does it cost to install a 91 intake cam?
i dont wanna get ripped off when i do install

All it cost me was the cost of the cam. IF you want to replace the VC gasket , if needed, then go for it, about 10-15 bucks. You should get some lube oil to wipe over the bearings and lobes of the new cam before installation. Just get a torque wrench and BE SURE TO ONLY TIGHTEN THE BEARING CAP BOLTS TO 52 INCH POUNDS, NOT FOOT POUNDS LIKE I DID!!!:mad: Now I have a broken bolt and easy out stuck in bearing cap bolt #1 along with a helicoil and new bolt!!! But she still screams!!! :D

Two local stores here in Tampa do it.
One wants $150
The other $75

damn, 150 is double the 75

anyone in the ny nj ct area wanna make a few bucks and install it?

Rosen Autosport on Richmond, VA. then again, i'm also getting on the dyno, so i dunno how much they'll charge for just the cam install. but AFAIK, labor rates are different everywhere.