Help Please [Archive] - SR20 Forum

: Help Please


NX-t
11-23-2001, 10:40 PM
okay, here is the problem I have a nx2000, with a gtir swap. when I did the swap the car ran for two days then what I thought was the clutch sliping began to happen, so I replaced the clutch with a ACT street disk, and xtreme plate, now the car is doing it again, I turned the corner , and shifted into second, and the car just reved, thats all it does now is rev, and shifts into any gear as if the clutch is always engaged what is this, what could it be?? I am baffled so give me any and all of your ideas, PLEASE tell me what to do to fix it.
Thanks, Jason

QuickZeek
11-23-2001, 11:47 PM
Have you adjusted the pedal?
or replace the Clutch cable?

Just some suggestions.

NX-t
11-24-2001, 02:30 AM
I have adjusted the clutch cable but not the pedal , and have not replace the clutch cable. Should I ?

QuickZeek
11-26-2001, 09:10 AM
I would replace the cable and see if that helps.

Over time the clutch cable will streatch and eventually you get to where you can't adjust it anymore.

NX-t
11-26-2001, 02:42 PM
it was the new act clutch plate, all the rivets popped on it.