11-30-2001, 01:39 AM
i don't know if anybody else jumped on the white face gauges deal about a week ago on Ebay, custom gauges made for your car for around $30. I did, and they're on their way. Can anyone give me any tips or anything i should know prior to installation? is it hard? btw this is going on a 93 NX..
11-30-2001, 02:01 AM
What deal? Is it still going on? Can you post the ebay #?
11-30-2001, 02:33 AM
i didn't read the whole write up, but here's the se-r.net guide to installing gauges (http://www.sr20de.net/electrical/gauge_install.htm). good luck.:)
11-30-2001, 02:47 AM
STOP! You don't have to remove your needles. I know because i just installed a set of the SE-R gauges from e-bay on my girlfriends car. All you have to do is remove the black caps from the needles and then the gauges will just simply slip right in. The gauges will go in without a problem on the gas and temp. gauges. You only have to remove the caps from the speedo and tach. Just take your time and pop one side of the cap off and then the other, make sure that you are holding the needle so you dont bend or break it. Any other questions just let me know.
12-04-2001, 10:00 PM
Hey can anyone post the ebay # for these guages. I ben on Ebay for awhile and can't find them. If not can someone give me a link to someone else that makes them
12-04-2001, 10:43 PM
The ebay thing ended...I already tried to get them and it had already finished.
12-05-2001, 01:55 AM
I think I made the Ebay thing out to be something great. oops. Hey, you guys can get the gauges from importintelligence.com - the Ebay auction was run by someone from import intelligence..so, yeah, check that site out. I can't wait until mine come in, i'll post pics.
12-05-2001, 10:15 AM
those overlays look like ass IMHO. they look cheap and hard to read. but then again im complaining about not having real faces for a 93-94. there are some but not really, have to pull some legs to get them. but only way id look at those overlays is if i got something like the carbon fiber ones so you dont notice how bad they look around the numbers.
12-05-2001, 12:08 PM
I owe you an apology. I am sorry that the white face gauges that I ordered are not up to your quality standards. I will try harder in the future to appease you.