Andreas Miko - Page 2

llaprad1 · 04-22-2002, 04:15 PM

This is how good he is:

I started flaming him lightly for what I thought was an inflated price for 99 SE wheels he was selling.

I shopped around a little, then bought them from him!

And they were in better condition than I imagined.

riksride · 04-30-2002, 03:07 PM

Quick shipment. No BS. Man of his word. I would not hesitate recommending or ordering from him again.

RySE-R 1 · 04-30-2002, 03:57 PM

Does Andreas have a web site? If so, could someone please post where it is?

CHI-B14SENTRA · 05-02-2002, 03:24 PM

DOES HE HAVE A SITE OR EVEN A PHONE NUMBER, WHATS HIS USER NAME FOR THE FORUM~

skyliner · 05-02-2002, 06:15 PM

His user name is Andreas Miko (imagine that)
Look him up under members button at top and he lists the number in his profile.

poppy_morenito · 05-06-2002, 08:13 AM

Andre is more honest than you want to hear sometimes. He installed the new JDM motor in my car , I even got to watch it come off the warehouse loor. He carefully picked out the best motor. He has also installed new altenator in my car because I am too dumb to do it myslef. ( He did it in the parlking lot of my job so I could drive home )

I trust no one else in Miami to touch my motor. Now if I could just get a hold of him to drop those S3's in and install my CAI ....lol

SE-Rican · 05-10-2002, 09:25 AM

Once again another good deal with Andreas!!! I just purchased some Eibach prokits and Tokico struts!!! from him. My car once again rides like a champ and thanks to him and some other peolple my SE-R is also hauling ASS!!!!!

Thanks Dre!

Serban · 05-10-2002, 11:40 AM

I too am a satisfied customer (again). I got a set of headers from Andreas, and I am very anxious to put them on.

Thanks again!

Driven97 · 05-16-2002, 06:09 PM

I've only bought a starter from the man, but the experience was perfect. Great price, came right away, and works like a charm. Also very fast to reply to e-mails. Driven97 approved.

NX1600lasgen · 05-16-2002, 10:49 PM

hey, i wanted to know if anybody can tell me where his shop is exactly located? i dont even feel the need to ask questions about the guy, from what youve all said... he's already acquired an "A" in my book.

i recently bought an sr20, and could use some parts. so maybe swinging by to meet him in person would be cool. anybody who got work done at his shop let me know how you got there.

ThomasSr20 · 05-16-2002, 11:57 PM

His number is 305-282-3643, any parts * need he could get * for a good price.

The shop he works on car in is call the Z-Shop.

Address= 13110 S. DiXiE Highway., Miami, Florida 33156

Ask him for direction if needed.

NX1600lasgen · 05-17-2002, 03:49 PM

hey, thanks alot bro, appreciate it....

blairellis · 05-23-2002, 08:34 AM

DO BUSINESS WITH THIS MAN IF NO ONE ELSE! he is very good with his "customer service" so to speak. he got my package to me very quickly and now it is on my car (alternator) and works like a charm...i am thankful for him being around and having this one to send to me....i will not hesitate to do business with him in the future...very reputable guy.

Brock Stepan · 05-27-2002, 08:28 PM

Ditto for what everyone else has said about him. He's prompt, knowlegeable, offers very reasonable prices on quality products, and is quick to respond to all forms of communication.

I have and will conitinue to purchase from him.

Mysta Joe · 05-30-2002, 10:09 PM

Andreas is definitley a good guy. He sells good stuff, just as he says and you get it quickly, no bullsh*t guy. He has helped me set up my turbo 200SX, from scratch, kinda a personal project for him. So far at 15 PSI we got 307 HP and 326 torque to the wheels. No track times yet. We are still doing some minor tuning then we will dyno again, at higher boost and go to the track. We will let you know how it turns out.

Anyway, bottom line, Andreas knows his stuff, and is a good person to deal with for parts.

vladha · 05-31-2002, 09:43 PM

I'm brand new here... just purchased a Veil White '91 SE-R with only 55k on it from the original owner.

Motor mounts definitely need to be replaced and I've been all over the other sited and mailing lists to gather information about the procedure, but what stuck over the type(s) of mounts to use.

Now, Andreas doesn't know me from spit. But, after reading through all the information I could find(there is a ton of it), and seeing his name come up so frequently(not just here, but everywhere), I decided to email him and ask for his advice.

I wasn't sure if he would have the time to offer his advice... he definitely seems to be an extremely busy individual. I let him know that'd I'd understand if he didn't have the time, I had done a lot of research and eventually would decide my own fate anyway. Well, faith and begorra. I got a replay from him the next morning. No bullsh*t, straight up and to the point. I had also let him know the type of responsiveness I was trying to find: No high torque high hp 1/4 mile launches. Just as much torque to the wheels as possible w/o all the harsh vibrations and buzziness I had read about(some vibration and buzziness was acceptable).

Anyway, he answered my questions... quickly and fully. I'm still amazed that a person with his experience and knowledge took the time to answer an email from someone he didn't know and was a new owner, to boot. And to make it even more amazing, he left me his cell phone number and his home number, if I had anymore questions.

With the exception of one of the boards(which will remain nameless), everyone in this community(here, and on the other boards and mailing lists) seems to be very thoughtful and willing to help. It gives me a lot of confidence when I go to do work on my "new" car. Thanks for all the information everyone has put on this board.

Special thanks to Andreas... that was a Righteous Act by him and very much appreciated by me.

Thanks y'all,
vladha

SpeedvizionSER · 06-03-2002, 04:25 PM

Andreas has sent me parts at unbeatable prices. Ships right out and everything is quality. Andreas Mikos=My Hero

v8killer2001 · 06-06-2002, 02:29 PM

I like Andreas, too

He *always* answers the phone when I call and never gets short with me on the phone when I ask a lot of questions. He is very fair and is very prompt in sending out the goods he sells.

I would recommend buying anything from him anyday.

SE-Rican · 06-09-2002, 08:16 PM

Well once again he hooked it up!! I just got my hands on some bada$$ SE-L wheels. They are mint. Thanks alot Dre for the hook up!!

v8killer2001 · 06-10-2002, 10:07 AM

Hey guys,

Last night, a customer of mine bought one of the 3" exhausts that Andreas Miko makes for turbo B13's and B14's. I must say that I am highly impressed with the overall build and quality of the piece. It is all mandrel bent and made from a total of 2 pieces of pipe, rather than many mandrel bends all welded together.

It looks very much like an aftermarket cat back exhaust by GReddy, HKS, etc...It is even flanged in the stock location before it goes up over the rear axle, unlike the "one piece" exhausts made by many muffler shops. This will make it easier to install and remove later.

I recommend this exhaust to anyone going turbo in their B13 or B14. I will definitely be buying one for my car!

Later,