A community of enthusiasts dedicated to Nissan's SR20DE/SR20VE/SR20DET engines.
Start here: forum search. Be sure to search on what you're looking for before posting a new thread.
You are currently browsing the forum as a guest. In order to access special features, the image gallery, and post you will need to be a registered member. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact the administrator.
I don't sell the cable. The closest thing I sell is the daughterboard with consult on board (this bundles the cable stuff with the daughterboard, check out the products thread). If you have a B14 that really doesn't help, eh?
For the cables, check ebay.
__________________
All posts by Calum in this thread are copyrighted by Calum, and cannot be edited, deleted, or copied without his express permission. calum@calumsult.com
If'n you feel like making your own, you can buy a couple 9 pin ends at radioshack and get yourself a piece of STP 22/2 pair wire. You'll only need to solder in three wires. Pin 2 is Receive, Pin 3 is Transmit, Pin 5 is Ground. So you'd have an extra wire from one of the pairs that you won't use.
If'n you feel like making your own, you can buy a couple 9 pin ends at radioshack and get yourself a piece of STP 22/2 pair wire. You'll only need to solder in three wires. Pin 2 is Receive, Pin 3 is Transmit, Pin 5 is Ground. So you'd have an extra wire from one of the pairs that you won't use.
but i wouldnt be buying from ebay seeing as though nearly all sold there are reselling consult interfaces theyve purchased from blazt.biz or plms and making quite a handy profit from it
Which cable are you refering to?
