drift6

Before i get flamed i have searched without any positive answers so....

I have a JDM P10 that i use for club racing (sealed circut) Bilstein shocks and 40mm lowered King springs and 205/50R15's on 15 x 7 rims



The next thing i want to do is fit sway bars's but none of our aftermarket suppliers (NZ) have anything off the shelf or any info on sizes.
I will get some made, but to try and eliminate hit and miss testing could someone with a setup like mine please measure their aftermarket bar to give me an idea of where to start.

Cheers
Cy

 

turbofied

Whiteline rear sway bar is 20mm front is 27mm

Is that a pulsar in the picture? as thats what the sizes are for if thats any help to you!

__________________
Neo forums wants you!:thumbsup:
www.neovvl.org

drift6

Cheers dude

Any part numbers by chance ? i Just searched the Whiteline online catalogue but no P10's, Primera or G20's

Nope thats the "JDM P10" in action LOL

turbofied

Being that P10 looks dam similar to a N14 try these numbers

Bnf14 27mm Jap spec N14 front sway bar
bnf13 24mm N14 Front sway bar.
bnr13z N14 18mm adjustable rear sway bar
bnr13 N14 18mm non adjustable rear sway bar

Bnf22 N15 27mm front sway bar
Bnr21 N15 20mm rear (I have this one)
Bnr21z N15 20mm rear adjustable

Also just to distiguish similar features does you P10 have a stock rear sway bar?

As N14s have stock rear bars
N15s didn't come with any from the factory!

drift6

Nope been there, N14's are about a foot narrower than a P10, had one spare off my flat mates N14 circut car and it was no where near close.

Cheers for the imput though

calou56

Hello

I'm going on track with my P10 also.

My setup is

-D2 with 9.8DN/mm² front and 7.2DN/mm² rear
-front upper arm cusco (-1cm short for negative camber)
-strut bar front and rear
-cusco H brace front under
-never enough auto rear sway bar 21mm (the best upgrade)
-I don't know what to do with the front sway bar. I want to try without her.
-I also find a bushing for the lower controle arm which add more caster.

calou56

spida

TRY a company by the name of CARBING if that dont help try G20.net they should have more info.