need help!!

jpshumway · 03-22-2008, 04:55 PM

did a ve swap got everything hooked up and in. Car turns over, fuel pump works, all the lights in the dash everything works, but no spark at spark plugs. Changed the coil and still no spark. Put new distributor, plugs, plug wires, cap, rotor, ect... I have been chasing wires and tring to figuer this out for 2 weeks now. I'm out of ideas and thoughts.

I'm not getting the single from the ECU to the distriutor moduler. Please let me know what your thoughts are.

BenFenner · 03-26-2008, 12:50 AM

What ECU are you running?

Try pulling the cylinder 1 spark plug and plugging it's spark plug wire directly into the coil, then ground out the coil. This should cause the plug to fire. If it doesn't we know it's a problem with the ignition. If it does fire, the problem is with the ECU, the wiring to the ECU, or possibly the distributor. This is a good test to rule out a few things though.