A community of enthusiasts dedicated to Nissan's SR20DE/SR20VE/SR20DET engines.
Start here: forum search. Be sure to search on what you're looking for before posting a new thread.
You are currently browsing the forum as a guest. In order to access special features, the image gallery, and post you will need to be a registered member. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact the administrator.
We only need ONE more person and we are set. I know someone out there wants a better handling B14 with a lot less wheel hop for $175 shipped.
Thanks!
---------------------------------------------
I setup a deal with my friend to make 10 B14 Four Point Control Arm Braces that will attach at the same positions as the "G-Load" Brace and other similar braces, plus two additional positions in order to stiffen the "Load" as to prevent flex for better take offs and cornering. They will all be powder coated red as a finishing touch and possibly black, but I will have to double check on that color. The price will be $175 shipped in the 48 States, and other states or countries can post, PM, or email me for shipping quotes at: NisMotorsports@hotmail.com
I will need 10 people to signup for this, and in addition, I will also need a deposit of at least half of the money to confirm the order. These will all be made around mid July and through the end of the month until August, so they should be ready to ship by then. Sorry it will take such a long time, but these are all going to be hand made and ten sets will take a while to produce, plus they will have to be sent to the powder coat shop for the final touches.
will these make the car understeer more? im just curious...also interested, thanks!
These braces should help with the understeer, but most of the understeer comes from the rear suspension of the B14. Just by placing a good rear suspension of about 300 lb or more springs, you will notice a bigger difference in the understeer. You would have to bend the rear beam to achieve close to zero toe for a great autocross suspension, but you will also lose top speed stability, if the toe is set at zero in the rear. I hope this helps.
will it clear a 3" dowpipe? thanks for the pics...looks very similar to the whiteline on the other group buy
The should clear the downpipe, but I will run the different exhaust sizes through him. It does, but I know he has made some revisions to his kit over some time.
ok once u confirm with him that it will clear a 3" downpipe, i'm in...i do a lot of freeway driving and need all the stability i can get, good lookin product!
ok once u confirm with him that it will clear a 3" downpipe, i'm in...i do a lot of freeway driving and need all the stability i can get, good lookin product!
He said the brace will hang 1/4" from the cross-member, so as long as the exhaust does not exceed that measurement, then you will be fine.
As soon as I have ten solid people, then I can go ahead and place the order and start receiving payments. I would like to end this by the end of the month, so by then I would like to start collecting the payments.
