1810

INFORMATION AND SPECS:

• Not too much of a discount but worth a try. This group buy is for 3 KARTBOY Polyurethane Exhaust 10mm Bushings in black only. Not sure the hole size with the other cars beside the B13 since I have them on my car, so research please. I will update the list everyday for those who are interested and paid.

Payment and Group Buy is CLOSED.

PRICING AND REQUIREMENTS:

• 10 + people buy-in.
• For 3 Bushings they are $22.00 SHIPPED pre-sale. (If you want more add 7 dollars per item.)
• They are normally $8.00 each not including shipping.

• NOTE: Mind that the B13 exhaust comes with 6 exhaust bushings, two where the cat is, 1 in the middle and 3 in the rear. I only did the rear of my car and my exhaust does not move at all. So its entirely up to you whether you want to run 3 or 6 bushings. If I can not get 10 or more people then I will refund everyone’s money to be fair which hopefully that will not happen. Items will begin shipping the following week for those who paid.

PAYMENT AND SHIPPING INFORMATION:

• Paypal $22.00 SHIPPED (for a quantity of 3).
  
• Additional bushings add $7.00. Payment can be sent to grabon_biz@hotmail.com.
• (Paypal and ship fees already added for your convenience). Any other form of payments please pm me. No pickup available.

REVIEWS LINKS:

• http://www.sr20forum.com/reviews/***...uct=36&cat=all

CONTACT INFORMATION:

• Any questions feel free to pm me or email me. I am on the forums most of the time so the best way to get hold of me is here.

Forum Name - Paid

01. Re-Spect - Paid Completed - Qty 3
02. sl33per - Paid Completed - Qty 4
03. Bullfrg - Paid Completed - Qty 3
04. Monty - Paid Completed - Qty 3 (12mm)
05. Coach - Paid Completed - Qty 6
06. Blusteelsr - Paid Completed - Qty 6
07. paNX2K&SE-R - Paid Completed - Qty 4
08. JCCT - Paid Completed - Qty 6
09. Re-Spect - Paid Completed - Qty 3 (Another set)
10. featherweight13 - Paid Completed - Qty 6
11. Annoymous Member - Paid Completed - Qty 8
12. glrraracer - Paid Completed - Qty 6
13. 1810 - Paid Completed - Qty 3
14. happynole - Paid Pending MO - Qty 12
15. 97se-rblown - Paid Completed - Qty 9
16. Peanuthead - Paid Completed - Qty 4
17. Erikbronx - Paid Completed - Qty 4 (12mm)

Those who express interest are listed now. Here is the price breakdown for different quantities.

qty 3 22 shipped
qty 4 29 shipped
qty 5 36 shipped
qty 6 43 shipped and so on so forth.

__________________

• 1810 Buyer/Seller Feedback
• FS: 1810 Mixture Aftermarket, OEM, Turbo Parts Vol. 3 (UPDATED 11.17.2008)
• Feedback not left from kiewi / macgod

 

RE-Spect

Pymnt sent!!!!

__________________
In Loving Memory of ZAD,We LUV Ya ta Death, Save us a Spot Next To Ya Up There, we'll see you soon

He can make 200,250 or even 300whp! Because at the end of the day, He's not going no where but up and down Liberty Avenue stuntin for the rest of his fellow Indian friends!

If ya want JDM go the fu_k to Japan

4Doors and not 2 are the real Sunny's

Diabolic Hippo

Good sh*t, nice guys!
They even sent it with free shipping to Hawaii!
Too bad they don't make the pink ones anymore.

bullfrg

Funnny this comes up now, I just installed a set I had laying around off my Evo and they worked very well. I might have to think about ordering 3 more for the cat mounts.

__________________
Evo is gone and back to a SE-R

WWW.UTAHNISSANS.COM

Diabolic Hippo

I swapped out mines from the down pipe all the way through to the muffer with #10's. Replacing the two by the cat are a pta to do. It does not create any clearance issues if you have a 2.5 down pipe. I dunno what kind of clearnce issues you may incur for all you guys all there with 3 exhaust piping.

1810

okay you guys can we keep this on topic. dont want to clutter the group buy even though you like these stiff bushings.

1810

no one want these?

Salvisol82

Do you need to mod these in any way to work with the b13? My 3" pipe likes to bang into the frame of the car whenever I make a sharp turn.



I went on kartboys website. They have subaru, mazda, and mitsu exhaust hanger products. Which ones are you using for the b13 application?

__________________
"Does it matter if the door handle lasts 10 years or 20?" Pelata says. "No it does not, because the person will not have the car after 10 years."

-Enjoying my old school nissan quality, day after day

Diabolic Hippo

Dude these would solve your problems.
No modification is necessary. You may want to research on the size hanger you will need (#10 or #12?)

featherweight13

are these shorter in length? my cheap ass ssa header points my hks catback at a weird angle. i need shorter/stiffer hangers to pull it away from my rear sway bar.

Diabolic Hippo

Yep, much shorter over oem hangers.
Have the same ssa header, no issues w/hangers.
These hangers are stiff as brick. I had clearance issues with my progress lca and my ssa header. Suffering a 5mm clearance. Swapped hangers, solved problem, no downpipe banging on the lca.

1810

^^ yes they are shorter than oem. I can take a picture for you guys the comparision later today if that will provide a benefit to the community.

Personally, I use a 10mm since the 12mm was too big for the exhaust hangers. Upon putting the 10mm, nothing move. I have a 3 inch VRS Kit from a group buy here. Before, every bump i hit the exhaust hit the chassis thus resulting in buying a set, now nothing moves. down there.

Im going to order another set for my other car as well. =P

Yes kartboy does not mention nissan because they were built for the subies, mazda, etc... but many people use them on other applications and they work.

glrraracer

I would really like some of these.
Anybody know how many are used on B14 2.0?
I just need to decide how many I will purchase.

__________________
98 Black SE
Air: Injen CAI / SSAC 2.5" DP Header (GB) / Stromung SS Mandrel w/ exp. chamber (GB)
Suspension: Tein SS Dampers with Pillowball mounts F/R
Braces: Ebay Front STB / Stillen Rear STB
Brakes: NX fronts / Maxima Rears / Braided Lines
Electric: 2 PPI amps 500w + 300w / 2 10" subs / Optima Red Top, Taylor 409 10.4mm SP wires (GB)
Want: 225HP turbo and Limited Slip! But too poor.

1810

^^ look under your car. . possibly dont quote me on this... 6?

Diabolic Hippo

^^^^ I would like to say between 6-8.
2 near the down pipe.
2 by the cat
1 after the cat?
2 for the muffler
I'll try and post some pics of mines over the weekend. Too bad they stop making the pink ones! 1810 sorry for intruding again, but the product is an excellent one and the guys @ kartboy are super cool. For some reason, my exhaust actually became louder upon changing the hangers, similar to the louder engine noises upon inserting the prothane mm's. Not a bad sound but a good one.

glrraracer

I've been under the car many times this past week, and I am being lazy by asking how many they are. I was really hoping to not work on the car tonight.

glrraracer

Without Jacking up the car, I gave a quick peek underneath and checked the FSM.
For the B14, there are 3 on the muffler alone, 1 between the muf and the cat and 2 for the cat. I'm not 100% positive, but that might be all of them.
Grand Total 6.
Now the question, should I replace some or all of them. I hate to waste money and have these things laying around.

Diabolic Hippo

You might as well do them all at the same time.
The two by the cat is going to be a bitch to do though.
If I remember correctly I changed out all of mines with the exception of the second one for the muffler. I shorted ordered one.
Bump! Common people, this is a great product!!
If you loved your Prothane mm's you love these.

glrraracer

I don't currently use Prothane MM's although I would like to replace mine at some point. I don't like the buzz induced with hard MM's when at idle.

So my fear is inducing a lot of buzz through the exhaust.

I do want to balance the buzz and the exhaust movement.

bullfrg

I did not notice any increase in buzz from my exhaust after installing these. Just alot less movement which should be less noise.

I will order some if it looks like the gb will go through.