Well fellas, the time is getting closer before the MauiG20 runs again (about time).
Much props to LanceSR20 whos is building the motor and the one and only SE-Rican for the strong support and help in the process.
As a quick update for the people who dont know, whats going in is a JDM roller rocker SR20 with the following:
-ARP Main Studs
-ARP Headstuds
-Cometic 87mm headgasket 0.030
-SR20DET pistons & rings 8:5:1 (new from Nissan)
-SR20VE N1 Oil pump (front cover), crank pulley, GTiR spacer, different oil pickup stick
-SR20DE Main beam girdle will be added to strengthen the bottom end a bit more (RR doesnt have one).
The stock rods will be used.
-USDM ECU with a full E-manage kit (ignition harness, RPM harness, boost harness).
As of now the car will be tuned at low boost 7.25 psi with the 36lb injectors as I break in the motor, and then most likely some HKS 60lb's will go in there. The setup might change a bit as well.
This is the old motor still in the car, I took the cams out which will go in the new motor (Thanks for the tips Lance & Rob)
Nice frontal shot
I fell in love with the no front bumper pictures
Yahnozha's BABK (Big ass brake kit)
Well fellas im going on vacation back to the islands to chill with CarlosSR & Rcer Ill be taking off this Saturday for a week.....sooo happy too.
)
