sinistersntra91

Ok, I pulled my tranny out of my 91 SE-R w/GTI-R DET to get it worked on, so temporarly I installed a P10 transmission that I had lying around, when I had it out of the car I took an energy suspension motor mount, shaved down the edges and pressed it in the transmission mount, after all was installled I went to take the car out and when I accelerate over 35mph it the steering wheel shakes and the car wobbles all over the place. Any ideas of what could be causing this? I mean its wobbles like my wheel is about to fall off...

Thanks,
Brennan

__________________
[b]Now metal fabricating, welding and powder coating. PM me with your needs!

 

howard_w13

I say work from the wheels back to the transmission.

Make sure the wheels are balanced, the suspension links/bushings are ok, etc.......

__________________
Vehicle:1995 Dark Green Infiniti G20
Real name:Howard Wright
Current mods:91 intake cam at 19* degrees, TopSpeed header, M3-style rear wing, P11 rims, *Recaro LS-L seats*
I.C.E.:Pioneer DEH-P6800MP CD/MP3 HU, Audiobahn AS65Q 6.5" components in front & back....HELLZ YEAH!!!!
"THOU SHALT NOT MOD THAT WHICH THY CANNOT MAINTAIN" -thus speaketh Mr. Ryte

sinistersntra91

Yeah it ended up being the hub, I jacked the car up in the air yanked on the wheels and I felt some slight play so after picking up a new hub at the junk yard cause I figured even if thats not the problem it still needed to be replaced, I took the suspension apart and half way through the tear down the spindle fell out of the hub, I was like hmm that cant be good.... so I replaced it and no im back to happy wobble free days.

Brennan