Just look at this and tell me what you think.

Pretty White · 03-24-2005, 08:06 PM

This is from the 1.6.
Hmmmmm.......

Is it just me or does it sit back farther? The mounting holes look to be the same distance apart..

robchaos19 · 03-26-2005, 01:05 PM

what am i supposed to be looking for here ??

Big John · 03-26-2005, 01:11 PM

It looks like it could be positioned farther back from the clutch arm.

John

Zexel · 03-26-2005, 07:20 PM

I had my old 1.6 clutch level bracket. The bracket is too long for the cable, and the cable with not reach the pivot arm for the T/O bearing. Tried it, with no luck. I'm sure with a little modification it might work, but I just did it for giggles.

Corey

Pretty White · 03-27-2005, 04:02 AM

Quote:

Originally Posted by Zexel

I had my old 1.6 clutch level bracket. The bracket is too long for the cable, and the cable with not reach the pivot arm for the T/O bearing. Tried it, with no luck. I'm sure with a little modification it might work, but I just did it for giggles.

Corey

Hehe, I kind of thought that, thats why I threw this out there. Even with adjustment it will not reach? Cool! So I guess the 1.6 lever goes back a little too far?

Zexel · 03-27-2005, 12:27 PM

Yes. I had my cable almost out of adjustment, and I was just pulling too tight to get the cable around the arm.

Corey

AaroNX · 03-28-2005, 12:57 AM

I've got that arm on my car. My tranny didn't come with one so I went to the junk yard and got one off a 1.6. Got the tranny mount bracket, and clutch cable off the same car.