blitzmr2

Does anyone (dealer) in the US stock OEM SR20VE parts, like water pumps, etc?

Where are you buying your:

-Clutch
-Lightweight flywheels
-Headers, like Fuji or Hotshot
-Anything else related to your VE swap or enhancement

Just curious on where people are buying what, and what you're paying.

__________________
Less is more.

 

eric96ser

If you look in the FAQ, you would see that the VE shares the same part numbers as the B15 SR20.

__________________
1996 200SX SE-R VE powered
1991 Sentra SE-R
2004 Subaru Forester turbo
2006 Mitsubishi Evolution IX

The community is here.

Andreas Miko

Clutch same as DE

Water Pump same as 00-01 DE

I sell Fujitsubo headers, if you want a Hotshot VE header get it right from HS

JWT will be coming out with the real big cams with Valve springs and retainers

Oil Pump you can get form JWT

JWT has the high performance ECU

Nissan has the PSP and Alt.

As fas as parts go there is no problem to get parts for the VE motor.

__________________
If you need any help with your car and you cant solve the problem, call me at 305-282-3643

Overcome With Love And Life, With Truth and Right, So Seek Happiness Before Vengence

blitzmr2

I looked through the FAQ, but failed to notice that. I did know that some parts were similar, like the oil filter.

blitzmr2

As of right now, regardless of the hassle, I am going to go with the VE distributor, so I need VE wires, cap, and rotor. I found part #s for the cap and rotor:

22157 1N510 SR20VE distributor rotor
22162 1N511 SR20VE distributor cap

What about the wires?

I looked in the FAQ, and I searched. I only want to know where people who are using the VE dist (I know, most don't) got their plug wires, cap and rotor. Courtesy and JWT seem to carry some OEM VE stuff.

And what about the rear main seal? Is this the same as DE? Is the alt belt the same, too?

blitzmr2

Does that apply to the main seals, alt belt, and ignition components?

BEAST

belt yes... most of us used the de Distrubator with a little grinding main seal should be the same.

__________________
(New all motor) 96 B14: Sr20VE JWT ECU, Msd switches, ES mounts and Bushings,2.25 stomung exhaust, KYB shocks, Eibach Sportlines, NGK Plugs/wires, ACT HDPP & Street disc, Hotshot CAI & Headers gen. 5,N-1 intake mani/TB,thermo spacers, B15 LSD trans, AEB1 GEN. 1 Header...
[

blitzmr2

Has anyone tried 00-01 DE cap/rotor/wires on the VE dist?

eric96ser

It has been discussed here that the VE block is 99% the same as the DE block, so the seals and other parts are the same. The VE uses the same belts as the DE also.

Fosters

I believe my rear & front main seals were from the 00-01 SR - I order my stuff from Greg Vogel, so he should know. I would think that any of the SR plug wires would actually work b/c the distrubitors look very similar on top - not guaranteeing anything though.

Josh

__________________

eric96ser

I used general SR20 parts when I replaced my rear main seal and rod bearings. The only VE parts that you can not buy at your neighborhood dealer, are the head and the pistons. The block is a DE block with the oil squirters, the crank is a roller rocker SR20 crank. I'm pretty sure the rods are standard SR20 parts. All the seals and gaskets are normal SR20 parts. The spark plug wires look to be the same as the B14 wires.

cocky

how about the headgasket?

BEAST

b15 headgastket is what you want

kesi24

No JWT sell's VE headgaskets.It's different from standerd sr20 headgaskets

__________________
Innovation distinguishes between a leader and a follower

BORNGEARHEAD

Mossy sells VE headgaskets also.

__________________
93 NX2000 VE
08 Frontier Se