cmng

Just to check on some VE ECU related question

Remapping not a issue
just to check on plug in the ECU and start the car and run it


Car with

SR16VE engine, SR20DE wiring from B13 SER


1)
can i plug in SR16VE ECU and start the car ,run the car ?
this mean VVL activation need to run manually
and distributor need to moded to make it run



2)
can i plug in GTiR ECU and start the car ?
need to do the same thing as above ?


3) Apexi Power FC RNN14
same work as above ?




IF
on SR16VE Engine with SR16VE wiring

4)
Can a SR20DE ECU can be used ?
this mean VVL activation need to run manually
and distributor need to moded to make it run

5)
Apexi Power FC RNN14
can it work just plug in ?
this mean VVL activation need to run manually
and distributor need to moded to make it run


Or better said
can i USE RNN14 ECU on SR16VE engine and SR16VE wiring
and reprogram the ECU

since haltech have come out pluggin kit for GTiR
wondering it will work on SR16VE Engine and SR16VE wiring only
VVL solenoid still can be activate with the Extra Input


thank

 

garyd

With the B13 loom this is true:

I think the sr16ve ecu works, but dont quote me on that. Do a search, theres plenty of people using them

The gtir ecu will probably work but will run sh*t due to obvious differences

The gtir powerfc will definatly work, again it will run sh*t due to injector sizes, maf differences etc. But this is all changeable. I am running s13 DET injectors B13/N14 MAF and it all works once its configured and tuned

Im not sure with the sr16ve loom. My gut feeling is yes it will probably work, but I am not sure.

BORNGEARHEAD

#1 is what I'm doing exactly. Car runs good.

__________________
93 NX2000 VE
08 Frontier Se

cmng

thank
if first option work

mean 16VE can run 20DE or GTiR ECU
just need reprogrammed the ECU only
Thank ..