FS: 12.2x 1.25" BABK 4 pot calipers

SR20Turbofreak · 10-22-2007, 12:07 AM

so i got 4 rotors, ( 12.2 x 1.25")
2 hats, (4x100 & 4x114.3 bolt pattern capable)
2- 4 pot 1.75" Wilwood billet dynalite calipers
1 set of 50% left brake pads ( E compound)

one set of rotors is slightly used and has some wear but the other set is in great condition. the pads are good but i would recommend buying another set if you can for the near future. I can not use this setup with my latest mods to my car.

I'm selling EVERYTHING pictured for $750 shipped. I can give you all the part numbers as well. No brake lines come with the kit because mine were made for my car specifically.

this will clear any B13/14/15 and P10/11. You will need some good offset wheels to clear the calipers and probobly 16" wheels atleast.

Keo · 10-22-2007, 12:27 AM

interested in the hats if you want to part out

SR20Turbofreak · 10-22-2007, 12:41 AM

Quote:

Originally Posted by Keo

interested in the hats if you want to part out

the hats are drilled and machined to fit both bolt patterns and the nissan center hub. i'd want $350 for both hats alone

nissansr20nx · 10-22-2007, 01:21 AM

bump for a good guy

paNX2K&SE-R · 10-22-2007, 09:48 PM

Are the hats off the shelf Wilwood?

SR20Turbofreak · 10-22-2007, 10:29 PM

Quote:

Originally Posted by paNX2K&SE-R

Are the hats off the shelf Wilwood?

these are wilwood hats but have to be machined to work.

Fosters · 10-23-2007, 11:22 AM

I think these are one of P@'s one-off sets. I thought either P@ or Charles had some pics of this setup on G20.net from when they were brand new.

Good luck selling a one hell of a BABK.

Josh

SR20Turbofreak · 10-24-2007, 01:45 AM

Quote:

Originally Posted by Fosters

I think these are one of P@'s one-off sets. I thought either P@ or Charles had some pics of this setup on G20.net from when they were brand new.

Good luck selling a one hell of a BABK.

Josh

yeah, this was a one off. I know P@ has made one more kit to this size though.