WTB: GTiR BOV +More!!!

SR_Lucifer · 02-18-2010, 09:52 PM

Hey I need a few parts-
GTiR BOV (stock) with tube if not no biggy
GtiR Water pump pully (can i use a stock DE one?)
New red silicone vac/heater hose Or a Site/store that has decent prices I found a site that has what i need but $$$$$
I want to buy a new clutch but if anybody has a SPEC stg. 3 sprung kit that hasnt been installed LMK please. I can buy the kit new for $355 shipped

I also want stock GTiR guages ( Oil temp, and any other gauge that's not part of the cluster)

There are a few Other little things I need Like resisters But i plan to buy those new. If you have a new set LMK
Also Do you cut the wires then solder in the resisters or splice them into the wire without cutting the wires?

I also need the part number for NGK spark plugs for a GTiR motor I have the ones I pulled out but they dont have any part numbers printed
Please any info or parts will help!
Thanks -Steven

trbob13 · 02-19-2010, 12:04 AM

i get the ngk bkr7e's.also i ordered the competition clutch stage 4 sprung hub 6 puck for my GTiR swapped b13. it holds 400wtq and i got it for 337 shipped. i got it from a vendor called evans-tuning. the number is 866-975-8863. im honestly suprised with the quality for the price. u should check it out.
p.s.-i had the spec stage 3 clutch in my avenir swapped b13 and didnt really like it too much.

se-rated r · 02-19-2010, 12:21 AM

i have the bov and i think the inlet tube also!

SR_Lucifer · 02-19-2010, 08:45 PM

Quote:

Originally Posted by trbob13

i get the ngk bkr7e's.also i ordered the competition clutch stage 4 sprung hub 6 puck for my GTiR swapped b13. it holds 400wtq and i got it for 337 shipped. i got it from a vendor called evans-tuning. the number is 866-975-8863. im honestly suprised with the quality for the price. u should check it out.
p.s.-i had the spec stage 3 clutch in my avenir swapped b13 and didnt really like it too much.

Hey Thanks! Those are the same ones I used in my w10 swapped P10 back in the day. I didnt know if i needed a higher or lower heat range. Thanks for the INFO!!!!

EDIT: I looked up there web site and they only have honda clutches on there. I will give 'em a call tomorrow. thanks

trbob13 · 02-20-2010, 01:36 AM

not a problem

SR_Lucifer · 02-20-2010, 03:16 PM

bump. little by little. Can I use header studs for the J-pipe? I have a broken stud i have been trying to get out. I might have to cut and drill it out and re-cut the threads....

SR_Lucifer · 02-21-2010, 07:22 PM

TTT I need some INFO! and PARTS!

Quote:

Originally Posted by se-rated r

i have the bov and i think the inlet tube also!

Whats UP? I sent you a PM a few days ago! LMK asap ThankS!!!!

irishjohn · 02-21-2010, 07:58 PM

i have a bov to fit the gtir it's an ARC. works great. $50 plus shipping

SR_Lucifer · 02-21-2010, 10:03 PM

Quote:

Originally Posted by irishjohn

i have a bov to fit the gtir it's an ARC. works great. $50 plus shipping

Is that atmospheric or recirculating type? I want a stock style recirculating style BOV it dose not have to be stock.

SR_Lucifer · 10-10-2010, 11:21 PM

Bump still need parts like stock BOV or anything that will work with recric setup
Here are some update Pics

SR_Lucifer · 10-10-2010, 11:47 PM

kzoosho · 10-11-2010, 02:11 AM

I have the stock bov 50 plus shipping. It's yours

theo · 10-12-2010, 07:03 PM

70 shipped for the tube and the bov

gtlaw · 10-13-2010, 11:55 AM

pm sent

http://www.sr20forum.com/forced-indu...ion-valve.html