Street_Sentra

anyone have new or used sr20 or sr20det injectors?? need them asap

 

BLACKMR2

i've got both and are in good condition 370cc for $175 and 259cc for $75. They are in the fuel rail.

let me know.

Street_Sentra

Ok....I will take them..but will the fit the 1.8L and will they do for a turbo set up???..if soo I will take them

__________________
Nothing Like a SR20DE

BLACKMR2

I'm not completely sure if it'll fit the 1.8 but hopefully someone in the forum can tell us if it does or not. By the way which motor are the injectors going into.

Street_Sentra

im putting it in a 2001 xe...first turbo in canada

BLACKMR2

whats the engine code on that motor? if its an sr, then it should fit.

JCGator42

they will not fit, they will fit a GA16DE but not a QG18DE, your motor uses top-feed injectors, you need to get MSD 50lbs or RC Engineering 310cc or bigger injectors or something similar if you want to run a turbo setup on a QG18DE,
JCC

__________________
2007 Scion TC Spec - yep yep, no more Sentra *
......COLLEXIUM......

BLACKMR2

Thanks, i'll know this next time.

Street_Sentra

JC...Where can I get these injectors???do I have to talk to travis again?

JCGator42

ok, here are the people to contact, just do some searches to find their phone #s, I am doing HW at the moment. Travis, Louis Anaya, Andreas Miko. They should all be able to get what you need, I have personal experience with both Louis and Travis and they are great. Just get some MSD 50lbs and get them shimmed to fit on the stock rail, get the Sorsen connectors and you'll be good to go, the injectors resistance needs to be around 12-14Ohms, so if they are not around there you need to run a resistor or two in series(to bring resistance up) or in parallel(to bring resistance down),
JCC

JCGator42

this place has everything you need, I believe this is Louis Anayas page, http://www.store.yahoo.com/sr20performance/,
JCC

Street_Sentra

Once again Jc come to the rescue