SR20 Forum banner

1 - 6 of 6 Posts

·
JDM style
Joined
·
1,091 Posts
Discussion Starter #1
i need the link to se-r.net to advance my timing, i lost it

anything i should know before i do it thats not listed on that link would be appreciated,
tools needed n such
tia
 

·
Registered
Joined
·
1,055 Posts
Well, go to se-r.net and go to the site index link on the left hand side of the page and there towards the bottom you will see a writeup about advancing timing. Click on it, and away you go. You will need a timing light, a 12mm socket and a run down of the timing marks on the crank pulley. You will also have to disconnect your tps and get your car in timing mode...read all about it on there page.

------------------
White
92 Nx2000
Cone intake, 19* timing, bosal performance muffler, 2.25" custom cat-back
 

·
Registered
Joined
·
487 Posts
<font face="Verdana, Arial" size="2">Originally posted by corbendallas:
Walmart in your area will be more than willing to help. Buy the light, use it, return it.
</font>
That's a trade secret! Don't forget to mark the spots for 15 and 19-21 (whatever you set it at). That way in the future you don't need the timing light again to set it at these points.


------------------
92 NX2000
Intake/Headers/Exhaust/Cams/Flywheel/Street Tires
14.545 @ 95.57 mph

 

·
RE-F/ING-TIRED:)
Joined
·
1,318 Posts
<font face="Verdana, Arial" size="2">Originally posted by Son Of Skyline:
That's a trade secret! Don't forget to mark the spots for 15 and 19-21 (whatever you set it at). That way in the future you don't need the timing light again to set it at these points.


</font>
...and marking the distributor is MY trade secret ;-)
 
1 - 6 of 6 Posts
Top