SR20 Forum banner
1 - 5 of 5 Posts

·
www.motorists.org
Joined
·
3,047 Posts
Discussion Starter · #1 ·
I haven't had mine for a while but now I'm having issues with the MAF plug becoming disconnected and having to pull over and push it back in. Anybody have an extra? Or know a ghetto way to hold it on there well enough?
 

·
newbie
Joined
·
8,148 Posts
Use electrical tape until ypu can get an extra one. I used to have an extra but don't now. They are real cheap from the dealer. If you need a new MAF plug I know the part numbers you need. Hold on let me go check the mailing list archives........

OK, here it goes. This is back in 98. These parts are not on the fische (computer). As a matter of fact I have tons of Nissan Fische lying around here somewhere. The dealer ususally has these box of plugs sitting around. But the part numbers are accurate. The names have changed ;)

To: [email protected] (Rick Zotz)
Subject: Re: MAF kit..
From: [email protected] (Ian Lyn)
Date: Wed, 11 Mar 1998 23:53:40 -0500
Cc: [email protected]
Reply-To: [email protected] (Ian Lyn)
Sender: [email protected]

--------------------------------------------------------------------------------

Rick Zotz wrote:
>>I would also like to rebuild my MAF harness, but the dealer I went to
today was clueless....

The dealer here in Queens NY had an identical harness kit (only this
plug is better! and you don't need that stupid rubber boot!!). The name
of the shop is Queens Nissan. The parts guy is named Harry. I bought
pins, plug and seals and used 16 gauge wires to extend the MAF harness
by about 1½". I will post these part #'s again. The dealer should have
harness kits. If they don't then give Harry a call! He has a box full of
them. Here goes:

>>1) MAF plug-part #J38751-110 List $17.74-Net $14.19
>>2) Terminals (the exact square pins, you can ONLY get at Nissan, I
used GM pins before but they are a real PITA)-part #-J38751-123 List
$2.10-Net $1.68
>>3) Seals-part # 38751-124 List $3.32-Net$2.66.

This is a local Nissan parts counter so I don't know if they can
ship (mail order). If anything, if you really want them call him, send
the money to me and I will pick them up and send them to you. Just cover
the shipping, which should be no more than a couple of bucks (if that
much).
 

·
pwnd
Joined
·
3,455 Posts
Ducktape and zip ties boy. come on now....you need to be more *******/ghetto. you had the ghetto pipes whats holding ya back now.

think george said once you could possibly fashion one from a paper clip, but it wont hold as good.
 

·
91 SE-R
Joined
·
228 Posts
Bowlcut said:
Ducktape and zip ties boy. come on now....you need to be more *******/ghetto. you had the ghetto pipes whats holding ya back now.

think george said once you could possibly fashion one from a paper clip, but it wont hold as good.
Ghetto - thin paper clip bent to fit.
 

·
Drive it like ya stole it
Joined
·
6,928 Posts
I prolly got one ben, e-mail me or something...I'll get you the hookup...lata..

~Ryan
[email protected]:cool:
 
1 - 5 of 5 Posts
Top