your pics dont work
anyone interested again (b13 se-r)...
HAVE PICS....
its a black 1992 Nissan Sentra SE-R, no sunroof or ABS, the perfect "racecar".
JDM sr20de, no emissions equipment except the cat. converter
weapon R intake pipe W/ stillen air horn and K&N filter
pacesetter header
single-chambered flowmaster muffler bolted directly after the cat. converter
nology hotwires
ACT extreme PP w/ 6 puck copper ceramic racing disk
weapon R coilovers w/ kyb gr-2 struts
axles from Raxles
ball joints replaced when suspension was upgraded
gr2 struts
strut mounts replaced, fronts and rears
solid engine mounts
synthetic oil used since inital start up
redline mt90 tranny fluid
retains power steering, but no A/C
Falken Azenis
^^^^the above netted me a 9.20 in the 1/8 mile (on 20x8x14 slicks)
single fogger barry grant NITROUS WORKS brand nitrous wet kit, 50 and 75 hp shots, dynotune purge kit (not installed), NOS brand bottle heater element
B&M t-handle shift knob with switch
walbro 255lph HP fuel pump
weapon-r 2gen fuel pressure regulator
^^^^i would like to go back to the track to see what my car runs if my car doesnt sell by then.
*UPDATED: went to the track this past november 2004 and ran 8.239 and 8.243 in the 1/8th mile (on 24.5x7x13 slicks with a 75 shot), Farmington dragway)*
no speakers, no headunit, no spare tire or the mat that covers it
extras include various engine parts from 2 sr20's, intake manifolds, JDM exhaust manifolds w/ US secondary, distributors, bocks, heads, valve cover, and other various parts, also included are the inner tail lights. AND and extra transmission.
NEED $3k for this, really dont want to let it go, BUT NEED MONEY ASAP!
located in Morganton, NC
thanks.
email me at [email protected] for more details.
scroll down for some pics or go to the following link:
http://www.imagestation.com/album/?id=4288183863
its a black 1992 Nissan Sentra SE-R, no sunroof or ABS, the perfect "racecar".
JDM sr20de, no emissions equipment except the cat. converter
weapon R intake pipe W/ stillen air horn and K&N filter
pacesetter header
single-chambered flowmaster muffler bolted directly after the cat. converter
nology hotwires
ACT extreme PP w/ 6 puck copper ceramic racing disk
weapon R coilovers w/ kyb gr-2 struts
axles from Raxles
ball joints replaced when suspension was upgraded
gr2 struts
strut mounts replaced, fronts and rears
solid engine mounts
synthetic oil used since inital start up
redline mt90 tranny fluid
retains power steering, but no A/C
Falken Azenis
^^^^the above netted me a 9.20 in the 1/8 mile (on 20x8x14 slicks)
single fogger barry grant NITROUS WORKS brand nitrous wet kit, 50 and 75 hp shots, dynotune purge kit (not installed), NOS brand bottle heater element
B&M t-handle shift knob with switch
walbro 255lph HP fuel pump
weapon-r 2gen fuel pressure regulator
^^^^i would like to go back to the track to see what my car runs if my car doesnt sell by then.
*UPDATED: went to the track this past november 2004 and ran 8.239 and 8.243 in the 1/8th mile (on 24.5x7x13 slicks with a 75 shot), Farmington dragway)*
no speakers, no headunit, no spare tire or the mat that covers it
extras include various engine parts from 2 sr20's, intake manifolds, JDM exhaust manifolds w/ US secondary, distributors, bocks, heads, valve cover, and other various parts, also included are the inner tail lights. AND and extra transmission.
NEED $3k for this, really dont want to let it go, BUT NEED MONEY ASAP!
located in Morganton, NC
thanks.
email me at [email protected] for more details.
scroll down for some pics or go to the following link:
http://www.imagestation.com/album/?id=4288183863
1 - 20 of 32 Posts
Are you willing to sell those engine mounts? Ill trade you my stockies plus 50 bucks. WHat brand are they??
-Mike
-Mike
I need a password. Can somebody just host or post the pics for me?
Majestical69 said:Are you willing to sell those engine mounts? Ill trade you my stockies plus 50 bucks. WHat brand are they??
-Mike
no sorry, they are already on the car, they are homemade with urethane, extremely stiff and cheap to do (you could buy the stuff for less than 50 bucks and do it yourself).
www.mcmaster.com
Flexible Urethane Casting Compound 1 Pound Liquid, 94 Shore A
part#8644 K18
23.51 before shipping
just mix the stuff, fill in the mounts and it sets within a couple of hours, but i would wait a night to reinstall the mounts. enough for all 4 mounts.
give me an email addy, i'll just email them to you.Johnny wangwang said:I need a password. Can somebody just host or post the pics for me?
Still no pics. Are you trying to sell the car still??
Thanks alot Marcus.
I'm here to help.Johnny wangwang said:Thanks alot Marcus.
REDLINEse-r- I have e-mailed you, PM'ed you (i think), and also tried to get at you through the forum. Whats up? How far are you from Raleigh?
thanks marcusmark! you have to insturct me on how to post pics on here.
anyways, johnny, i emailed you.
didnt get a pm though. rained and iced up down here, couldnt get to my computer at my sister's house yesterday, thats why it took me til today.
anyways, johnny, i emailed you.
didnt get a pm though. rained and iced up down here, couldnt get to my computer at my sister's house yesterday, thats why it took me til today.
ok, i tried many various combos with the things and never got it to work, but now i see i have to take off the .orig.jpg, i never knew that.MARCUSMARC said:![]()
For imagestation you have to take off the .orig.jpg that is on the end of the url...
thanks!
*edited* got my answer already
bump it up
to the top...
still forsale!!!!!!!
pics are old, nitrous bottle is now mounted right behind the front seats and in the middle so you can open or close it by hand. and a couple of other little changes...
pics are old, nitrous bottle is now mounted right behind the front seats and in the middle so you can open or close it by hand. and a couple of other little changes...
1 - 20 of 32 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
SR20 Forum
A forum community dedicated to Nissan SR20 Engine owners and enthusiasts. Come join the discussion about performance, builds, turbos, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
