[prettywhitese-r]

Total newbie to this section did my researching though this was an area that wasnt touched upon. so whats the best maf for a sr20ve motor ? is it the stock maf or like a Z32,cobra, etc,

 

[tHe iLleSt RiCe]

depends on the setup.

 

[kyoshoboy]

what depends on what???wanted to know this one too.

coz i have a z32 sittin here came off my turbo setup and wanted to know if this a good maf and easy to tune for sr20ve,mine as well use it if its ok so i dont have to buy another maf.

not jackin ur thread just curious bout it too,sorry.

 

[tHe iLleSt RiCe]

the z32 is fine...iirc, calum has a tune for that maf for us ve guys. Although i would consider the z32 maf a bit overkill for an n/a ve, it will work just fine. The most common maf would be the maxima maf however.

 

[iamhappy46]

N60 MAF or the stock VE MAF as they all flow good amounts of air

 

[kyoshoboy]

so its an overkill for the ve,i was thinkin of that too.is this only good for turbo setup and not for NA ve?

the best thing to do is toss this useless z32and get a n60,e60 or e61 maf?

 

[turbofied]

z32 actually fetch alot of money! you could get 2 n60 mafs for the price of a z32!!

 

[kyoshoboy]

^^^^well i have a z32 maf just collecting dust,i dont have to buy another one.

should i use this z32 or just get an n60,e60 or e61?

 

[turbofied]

The tuning resolution for your afm will suffer! thats why people use smaller ones!

Sell it and get a rb25 or n60 maf and pocket the rest of the $$$

Your all set!

 

[kyoshoboy]

aight thnx!

 

[paNX2K&SE-R]

If you are going to run a calum ecu then get an N60 maf for sure.

 

[prettywhitese-r]

N60 maf=is that a maxima one

 

[turbofied]

Yup from 91 to 94 i think....

 

[Taiden]

If you are going to run a calum ecu then get an N60 maf for sure.

Calum can also do E60 mafs. I asked him.

N60 maf=is that a maxima one

Yes

Yup from 91 to 94 i think....

89-94

 

[peruvianpulsar]

does de N60 MAF maxima with the purple tag work with the SR16VE ECU?? the stock ecu?? or i need an apexi?

thanks

 

[Yellow4g63]

...............

what depends on what???wanted to know this one too.

coz i have a z32 sittin here came off my turbo setup and wanted to know if this a good maf and easy to tune for sr20ve,mine as well use it if its ok so i dont have to buy another maf.

not jackin ur thread just curious bout it too,sorry.

If you already have the Z32 maf go ahead and use it. Ivan runs a Z32 AFM on his car with the Calum ecu.

 

[kyoshoboy]

do not use a Z32 MAF for NA, the voltage span is to wide for real good tuning.

Use a 95-98 Max MAF

Max MAF 325 WHP
Z32 MAF 500 WWP

i found this and kinda worried bout what miko post here,i prolly just get a n60 maf.,can someone explain this ^^^?

 

[Yellow4g63]

Then the stock DE maf is better than the max maf because thats 250 max hp right there.

 

[kyoshoboy]

i dont think il be staying on stock de maf,this thing is too small,and too restricted.

whats wrong with the n60 maf?

 

[Yellow4g63]

Nothing wrong with it or the Z32 maf.