SR20 Forum banner
1 - 11 of 11 Posts
Joined
·
791 Posts
Discussion Starter · #1 ·
ok I just bought one of those cheese manual boost controllers. well I cut into the wastegate vacuum line and put the controller inline and took it out for a spin. well not matter what way I true the nob it still wants to boost over 15 PSI. What am I doing wrong???
 

·
Registered
Joined
·
3,442 Posts
I said this about 4 times.. but i'll say it again. try and switch the two vacuum lines around on the boost controller. sounds dumb, but thats what i did. God 15 psi felt good tho :) let me know if it works
 

·
Registered
Joined
·
3,442 Posts
ur also going to want to test it on an open road and someone else in the car with u to watch the gauges
 

·
Registered
Joined
·
3,442 Posts
u may want to TRY and connect the other side of the line to a different source.. not sure if that will help any. if not.. like rockwood said.. ****'s probably broken
 

·
Registered
Joined
·
3,442 Posts
yups^^^^
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top