SR20 Forum banner
1 - 2 of 2 Posts

· Registered
1,819 Posts
<font face="Verdana, Arial" size="2">Originally posted by Bwilsor:
How do you know if the ride height is even at all 4 wheels?</font>
I usually just get some measuring tape and measure from the ground to the fender, or measure from the center of the wheel to the fender. It shouldn't be the same height between the front and the back. The back fender was designed lower, and it gives the illusion that the back is lower than the front. The car will look slightly raked if you have it even at all 4 corners (but it looks pretty good, IMHO.)

Andrew Phan
1998 200SX SE-R
slow car, slower driver
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.