SR20 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have some CP pistons for sale for the sr20de(t). They are 8.5:1 compression ratio and 86.5mm bore. They are VERY slightly used... ~1000 miles, 500 of which were break-in. They were checked out and measured by a machine shop and they are good to go... They come with every thing that you would get if you ordered new from a CP distributor. Pistons, wrist pins, c-clips, rings and a sticker. I would,however, suggest getting new rings, as re-using rings is never recomendable for how cheap the added insurance would be.

They are on ebay right now with only one day left. They are currently at 200 with no reserve!
http://cgi.ebay.com/ebaymotors/ws/e...472730483&viewitem=&sspagename=STRK:MESELX:IT
 
1 - 1 of 1 Posts
Top